Search results

Greetings, I’m posting here because I’m aware this tyre has been fitted to a limited number of other machines (Scag for sure) not just my Hustler Raptor 36”. These Grassmaster/turf saver tyres are good however finding replacements in Australia is nearly impossible. The 20x8-10 is a...

Greetings, I just purchased a donaldson filter for a FX651 to convert my FR651. I failed to realise that the intake is larger on the FX machine. This appears to be a marketing ploy as the outlet side of the filter is 50mm. The same as the FR intake. But they have made the FX 63mm...

My engine installled on a Hustler has just over 500hrs on it and is starting to burn oil. It’s a little smokey at start up and I’m guessing the valve seals need replacing. This is my work machine so I don’t want anymore downtime than necessary but my question is: should I do anything else while...

Greetings, The pulley on my clutch assembly (605777k) is worn and I would like to replace it. The item is sold as a complete assembly and the quote I got was $780aud. There are no issues with the clutch just the pulley. Has anyone replaced this pulley and point me in the right...

Greetings, Riddle me this, working on a 322L that wont start. I have spark. Air gap is correct. Swapped plugs and both producing good spark. Removed flywheel and confirmed timing. Have fuel with no blockages or restrictions. When pull starting and plug out, fuel vapor evident...

Given how much heat EV stuff cops on this site, I thought I would do a quick review on the is kit. I purchased the kit with additional 2x6ah batteries. In my opinion they shouldn’t be selling these kits with 5ah batteries but they are catering to a price point. My overall opinion of this kit...

Greetings, this machine won’t run. Plug is good and I replaced the coil which I now believe wasn’t the issue. Still could be wrong but the chances of a dud coil arriving is pretty slim. What am I missing. I disconnected the kill switch wire from the coil and still no spark. Coil...

Greetings, Trying to repair the above machine which is possibly a rebranded Powermate generator. Issue: wont start Symptoms: Fuel to and in the carb. Has spark. Will run if fuel is poured into throttle body. Diagnosis: Carb blockage. I have not stripped the carb at this point as...

Greetings, Riddle me this, I’m replacing the carb on the above machine and went to start it and heard this ticking noise. It is coming from the exhaust side of the cam. Just after the intake closes the exhaust opens very slightly then snaps shut and makes a click/clack sound like it’s rides off...

Greetings, Does anyone have any good suggestions for replacing #576625301 straps for the above machine. Anything genuine is going to cost over $200aud. Redmax 8500 blower harness seems to be around the $40usd mark. Just not a 100% which one to go with so recommendations would be...

Greetings, Anyone have the service manual for above blower. Machine not starting and need to go for a dive. Apparently there is something that needs replacing regularly. Be nice to have the shop manual to go off. Cheers mat

Greetings, Has anyone got any good suggestions for zero turn seats. My Hustler Raptor seat needs replacing. They are rubbish. A cushion mounted to a piece of plywood. And it doesnt even look like marine ply. Ive seena few of the boat seats look like they might fit. Has anyone...

Was mowing the other day and jumped off to grab the sprayer. Turned the key off and it just didn’t feel right. Went to turn it back on and it exploded all over the grass. I think I managed to get all pieces back except possibly two ball bearings. I assumed they were missing after looking at the...

The drive belt on the raptor SD keeps throwing. I clipped a post the other day and it spat the belt immediately. Up until that point and after 290hrs, I have only had the belt come off once and that was when it wore out and snapped. There does not appear to be any damage to the Hydro drive...

Holy moly! I just got a quote for a new rear tyre for my Hustler raptor and it was $220aud A TYRE!?? passenger tyre are only a $100 and my 285/75r16 are $300. Can someone suggest a good source for tyres? It would be cheaper to buy my own tyre manufacturing plant than buy a set.

Greetings, I am wanting to sell mower blades for zero turns initially. Does anyone recommend a producer or have a contact. I live in Australia so wil need to import. cheers

Hi, I have a husqvarna 322l trimmer. Think it’s 2018. Coils dead and I don’t want to pay $100 for a new one. Are aftermarket worth trying and any recommendations? cheers mat

Greetings, Has anyone ever added a tacho to their deck spindles? I’ve snapped a couple of belts on my hustler recently due to cutting really heavy grass while running a mulch kit. Driving by ear at the moment but every now and then the blades are locking up. Just wanting a visual...

Greetings, I have the fr651 engine in my hustler and just looking for a bit more grunt as I run a mulch plug full time and need to keep the tip speed up. I have done a lot of research and from everything I found the block and running gear are identical to the fr730. The only...