Search results

Sir?

Bert, I agree exactly with what you have said, my Americans have no idea how good they have it, but if the government doesn't slow this crap down there is not going to be an America. My only rub is if they are going to play they need to pay. Give'em all a green card and let them get on a...

Couldn't agree more, We called them Lifers' in the military, Lazy Ignorant F's Expecting Retirement, the civilian version of them is LIBERALS, Cheers, Ray

Every one of the immigrants walking across the border today thinks someone owes them a living as well

check fuses

I found a source for 10" tires> https://www.chapmoto.com/ocelot-p3026-golf-cart-tire.html, anyone see issue with this tire?

Gentlemen, after searching the web, I just built it myself. 2x4s for upright and cross member. the shade frame is old umbrella frame, hinges and bracket came from a couple old gate openers. I reinforced all the pivot point with steel & pop rivits. One can remove a couple bolts and it will...

Gentlemen, I have a 2019 BOBCAT CRZ 48", it came with 20x10x10 rear tires. Any one know if I can obtain 20x10x8 rims to fit this machine? I would like to find a rear tires with better traction and I have not found a good choice in the stock size but see many choice with 8" hubs. Cheers, Ray

Craig, a battery should never drop below it's rated voltage. If it does likely it has a bad cell and it's time for a new one. Typical lead acid battery is ~2.2 volts per cell, 12volt lead acid battery at full charge will ready ~13 volts, if it drops below 12 volts it's time to replace. Cheers Ray

If you have lights pull them on an see if you voltage drops? Or get a clamp on light and do the test. Sounds like you just got a bad battery, load does not make this happen, something would be smoking. If the voltage is dropping you got Zero AMPS to use.. r

Bert, this is the litigation nation, ya can't afford to hire this lousy crowd.. r

Hi Rivets, I have been looking options, even just fabricating the parts myself, it is very disheartening to see just how much material cost have escalated. I hope someone stops this silliness soon before we can't afford to eat... Thanks, Ry

Anyone have a ZTR with a sun shade that is not equipped with ROPS? I was considering manufacturing a frame and adding something similar to this to it> https://www.mowersatjacks.com/product-details/ariens/71509200?msclkid=2d3ac994e96a18ce93eeab5975890c9f Recommendations welcome, Cheers, Ray

Spot on Sir, same here in Ga, one only has to look at where the breather is on a farm tractor, up high above the engine, let's call it snorkel. Only way to escape the dirt it to get up above it. Cheers, Ray I sure hope those that voted for Biden are having a hard time paying for gas...

JC, as you know I took the high road and built my own filter assembly, here's a link to one that I'm sure would server you well. https://powerequipmentman.com/collections/all-products/products/air-filter-upgrade-kit Unitl you get that crummy elbow that attaches your filter sooner or latter you...

Go Battery and forget mixing fuel....r

So you really believe it's OK to let it choke with dirt until it starts to run bad then change? I'm sure glad you're not doing my maintenance. Just curious, what does your oil look like?

Hi JC, if you dig around on the site you can find many discussions about air filters. There are even some that will call you thrifty for complaining about having to replace your air filter. There are upgrades available for you air filter box. I took it on myself, couldn't be happier with the...

Bob, you are most welcome, Cheers, Ray

On the real lawn service trailer (not the 10' trailers behind F150s) I see most Exmark, Scag, JD and a few BobCat. Honestly I don't see anything at the BOX stores I'll even give a wink at. I've a near 20 year old Cub rider that has been a trouper but have not intentions of another. I recently...

You know CA puts a cancer waring on just about everything, honestly I wonder how there is anyone left in the Left Wing Slum... Cheers, Ray

Looks nice, you could always get a real mower, go "BobCat". I hope it servers you well, let us know how it does in a year. cheers, r

On my LT42, the seat switch chops the engine, blades have to stop if the motor is not running, Cheers, r

one wire is switch hot when you pull out the switch, the other is ground, meter this out , cut off the connector and hard wire. Or pick up some connecters and replace. This is a five minute fix if you can use a meter and tools. r

If it has a B&S engine on it take it back for sure, r

Bill, what year & size is your CRZ. I have a 2019 48" that I really like, Cheers, Ray

Mr Cook, my engine is an FR651V, do you know if the same items will work on it? r

No ruts here, yard is so hard you can't drive a nail in it.. Never go the same way twice, it actually works,,, r

Anyone got one that likes damp grass???

Sir, when you find one that like damp grass, let us all know..r

I just put a replacement carb on my 455, it would not run slow enough on the minimum setting to not turn the chain. After removing the limiters I set both screws at 2 turns, ended up with the L at ~ 1 and 1/2 and the high at ~ 1 3/4. Saw runs like new. I was surprised to find that one could...

One more reason not to buy another CC...

Why not get the next smaller filter so it will not touch?

Maybe you should go look at something different, perhaps a "BOBCAT" Cheers, r

Man, unless you got some very easy riding, get a tractor.. I'd hate to know I had 5 acres to bounce over on a ZTR. Cheers, Ray

Man you are nice, STUPID is as nice as I get, unfortunately he knows exactly what he is doing and it is not for mine or your good... r

Yep, guess who will be missing from the picture, Sippy Cup Joe...

Shell Rotella T6 5W-40 , I have started running this in all my 4 cycle air cooled engines, they purr on this stuff and run much cooler. r

I would ask what changed? I assume this has not always been an issue.r

Steve, you might look at XHT Blades, sounds like thy are similar to Fusion, working nice on my CRZ, my machine is only 48" and I often find bundles of 3 blades for $30...r

Tell me what you like about your string trimmer. I'm looking for 40v, dual line, bump feed, undecided on var speed or two speed. typically like a curved shaft but will consider a straight shaft. Would prefer it to be easy to load and have decent run time. Thanks, Ray

These work great>...

Anyone else using a "Grass Flap"? I've had some form of shoot blocker on my riding mower for years (one should see the rube goldberg set up on my Cub Cadet) and I knew when I got a ZTR it would be difficult to use a hand operated one. I have many plants and other things in my yard that I didn't...

I've a 2019 Bobcat CRV 48" - the original blades were offset, since then I have run both offset and straight. I don't believe I see a differene in cut quality. I was curious of others opinion of this matter. Cheers, Ray

BadBoy, Toro, Hustler are few I would consider, with alittle searching you might find BobCat or SCAG that you would consider. Cheers, Ray

Toro, Hustler, Bad Boy for a start

https://www.amazon.com/Kano-Kroil-Penetrating-liquid-KROIL/dp/B000F09CF4/ref=asc_df_B000F09CF4?tag=bingshoppinga-20&linkCode=df0&hvadid=80401840125115&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4584001418905955&psc=1 Best penetrating oil on the planet, r

Hustler, Bad Boy, Toro, all I'm indicating is don't let your Google search limit your search for a machine. there are many fine ZTRs on the market that don't show up quickly when you do a Google search. When you search for Best ZTR you get crap for results !! (I don't think anyone on the forum...