Search results

Well said Rivet, if I could add, check you battery voltage when you turn the switch to crank, see if you still have voltage or if it drops to zero, you could also leave a test light across the battery when you attempt to crank and see if it goes out. Both simply check for a flat battery. Always...

So who else thinks razor sharp is not the way to go ?

Sir, please explain what you mean> blow down the hydros? thanks r

48" https://www.bobcat.com/na/en/equipment/mowers/zero-turn-mowers/zt2000

Anyone left here that still drinks "Bub Light", LOL, Cheers, Ray

Best penetrating oil on the market> https://www.kroil.com/

It makes me believe the engine is subject to running hot, hell, all air cool engines run hot. I have always took time to keep my engine cooling fins clean but never had to remove cover specifically to clean the top of the engine (Does this define Touchy). Honestly I feel the manufactures did...

Sir, what makes the engine so touchy, never bothered doing this to other engines in the past.

My old neighbor, rest is soul, I watched him purchase a new mower about every 3 or 4 years for over 20 years while I ran the same old cub cadet. Many time I offered to help him repair instead of replace, he never let me turn a wrench on his machine but we share many long drinks of our favorite...

Toby, had machine since fall 2020, the mower does an absolutely super job cutting grass. I'm simply trying to make the deck perform better cleaning itself. r

If his was a mulching deck would there not be a panel to close the discharge? r

Hi MParr, let me clear up some questions, first the mower is set up as it was purchased. All thought they may appear to be I never added a mulch kit, part#s right off the original parts listing. 38 4165972.7 BAFFLE-FRONT, CENTER 48 1 39 4165971.7 BAFFLE-FRONT, LH 48IN 1 40 4168527.7...

Bert, I agree that with on water or oxygen there is no rust. Your heart is in the right place Sir, thanks, Ray

Bert, I agree 100% the issue is caused by airflow (actually lack of it) a the intersection where the blades cross. As to the type blades I run. 112111-01 OEM which are slightly offset and the XHT equivalent which are actually flat with a longer cutting area and a similar turned up trailing...

Yes Sir, at least once a year and logged in the history, I myself find this little need as it is typically very clean

ST, it's not the void area (where I have green line) that is the problem, It is simply the area that resembles a W where the blades meet. typically I see this come to a point, on my deck it almost looks like a W, it is the middle of the W where the grass is sticking, r

Mark, I reviewed the videos. Really don't see anything that I think will help. I believe if I remove the entire front baffle it will cause the deck to loose lift and deposit material across the entire front edge. Not ready to try this as a solution but I appreciate the suggestion, r

Bert, the leading edge of each of the blades are turning toward the side discharge. Very little clipping make it to the are I drew the green line in. My intent is to re shape the area of the front baffle between the blades, removing the area where the material is sticking. thanks r

Gentlemen, I looking for a solution to prevent grass gathering on the back of the baffle between the blades. The first photo show an up skirt shot of the deck. Next is a paint sketch trying to show the problem I am addressing. This is not perfect but I believe you can get my point, look...

Themus, I have no idea why the price split or differences, I have the 550 from Tractor supply and use it to lift a 48" 2019 BobCat CRZ, it works well, there is some raw metal on the unit that one needs to oil or wax to prevent/hinder rust but otherwise it certainly does the job. JMHO, Ray

Rick, also look closely at you deck to make sure it is still hung properly, something may be out of place. Cheers, Ray

Hard to believe that much of this lame brain crap is not padding the pockets of our lame brain president...

What you want to bet one regimen change in the White House and much of this electric stupidity will also go away. r

Sure, go electric (battery) just don't park it anywhere you don't want it burnt down.. Cheers, Ray

Gentlemen, my recent project to build a No_Pump_Sprayer. First I salvaged the 2 gallon tank from an old compressor and many of the fittings from a retired really noisy compressor. The hand truck had been sitting around for way to many years with no purpose. A few additional fitting, a...

I sure there are pro's and con's for both, one thing for sure, given reasonably level yard the Zturn is certainly faster. I went from a 46" tractor to a 48" Zturn and it cut my mowing time in half, JMHO

Neanderthals watch a bunch of sweaty dudes playing ball, now put a team of good looking Skirts out here bouncing around and I'll watch. In the mean time they can find some other way to make a living.... JMHO,, Cheers. r

Gentlemen, do you routinely use belt dressing on you mower belts? If so what brand, thanks Ray

simple, the larges pile of Green Junk around.............

I would not put a battery ZTR in my barn if you want to have it (the barn) very long... https://duckduckgo.com/?q=battery+ztr+on+fire&t=newext&atb=v327-1&iax=videos&ia=videos&iai=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DDyG-JjejJvM

I don't think I am ready for EV mower but I certainly enjoy my battery headge & string trimmer...

Here's metal version that looks promising, https://www.mfgsupply.com/23-12112.html r

Maybe this is of interest, here's a metal version, https://www.mfgsupply.com/23-12112.html Cheers, Ray

Well you could get a John Deere, they got more seat choices than anyone else, seems to be the highlight of their options. LOL

Who's the leader for improvements on ZTRs for the coming season? Cheers, Ray

You'll need a bigger hammer.. Try Kroil penetrating oil, works wonders getting stuff unstuck. r

Plugged up muffler...

Well Aboard, jump right in, there are many great minds here ready to assist.

It's all that Global Warming our BOZO Pres is shutting about. Merry Christmas, I hope folks can afford to heat their homes... Cheers, Ray

Take a look at this one>...

Life must really be difficult for some folks.....

Nothing like a good pair of pruning shears for cutting gas lines.. Cheers...

Sir, I'm glad you are ok, please never use any heat source or open flame near gas. We don't what to learn of you on the evening news...Cheers. Ray

Curious what model anyone has tired of the small quite Air Compressor? I recently got a 2gallon Husky. Initial review is very favorable, time will tell how it holds up. Normal use is tire inflation and small cleaning jobs like the vacuum cleaner filter. It certainly is quite, much preferred...

Ain't what they used to be, notice where they are now made...

Nothing like an improvement that ends up costing you more. Wonder where they find their engineers...r

Buddy, blade is for a Bobcat 48" CRZ, 16 1/4". r

Gentlemen, what 16 1/4 high lift blade is rated to have most lift you can identify ? thanks, Ray