JOHN DEERE HYDRO 175 TRANSMISSION

[mes]

I REPLACED THE DRIVE BELT ON MY 1980 HYDRO 175 & HAD REMOVED SOME OF THE TRANSMISSION LINKAGE. PUT ALL BACK TOGETHER AND NOW IT RUNS IN REVERSE WHEN PUT IT FORWARD AND VICE VERSA.
HOW IN THE WORLD DID I MANAGE THIS? WHAT CAN I DO TO FIX THIS? THANKS

 

[KennyV]

WELCOME to these Forums...
UN lock your Cap locks...

You either have your belt twisted... and running the trans axle backwards OR you have the linkage upside down... give it a close visual inspection... :smile:KennyV

 

[mes]

WELCOME to these Forums...
UN lock your Cap locks...

You either have your belt twisted... and running the trans axle backwards OR you have the linkage upside down... give it a close visual inspection... :smile:KennyV

Thanks KennyV, I appreciate your help and your quick response!

 

[reynoldston]

That model JD I could see where you could put the belt on wrong. The trans linkage only go's on one way.

 

[crickett]

new member here i have the same problem guy gave me a 175 that someone took trans apart and reinstalled and trans runs backwards belt and linkage look ok is there anything inside that could be installed wrong runs great and pulls great with no noises

 

[BlazNT]

Model number?

 

[crickett]

Model number?

M00175X017171

 

[BlazNT]

I can not find that model number anywhere.

 

[crickett]

I can not find that model number anywhere.

thats whats on the tag

 

[BlazNT]

I found the service manual. Page 72 has picture of belt routing. Get it while it is still there. I used M00175X to find it.
uni.edu/peterson/John%20Deere%20175%20Tractor/John%20Deere%20175%20Hydro%20Service%20Manual.pdf