Search results

I have a Kubota B4200 (1995) compact tractor, that I have turf tires and need to know the tire pressure to use on the front, 20X8X10 on the rear 29X12X15? thanks John

Right now, the dealer is picking it up Tuesday it is under warranty I have to Pay $120 for pickup and delivery. I don't care just so it is fixed by the dealer (my trailer to small). I have pulled the plug and it is firing good and I put a spark plug tester and there is plenty of spark. Let the...

called the dealer. Consensus in the shop is one of two options- Running on the one cylinder only, or over fueling- Both options have several things to look at, so can't give an accurate "this is it" from the spark plug pics. Welcome to bring it down, or we can come and get it. going in...

Rivets are 3 pictures of my plugs; right side looks a little sooty. I mowed today just over an hour, at full throttle it runs great, but you can see the gas gauge go down, some. If I have to put in more gas than usual I will for it does a great job, I like my machine.

JD X580 using a lot of gas when mowing I have 2022 JD X580 with 18 hours on it. I am using a lot of gas when mowing at full throttle. The dealer said to put the rpm just in the green on the tack and if the mower runs good then cut there. I did this and the mower ran good did not use as much...

KeystoneKid2121 Reference your March 18, 2023, you asked when to do the first fluid change, I added two charts that were in text format and did not make any since. Since then, I changed them to PDF format and the came out good, so they are attached, and you can use them or make changes to suit...

Went to the Kubota dealer that I do business with and saw the mechanic Jack and asked him about it. He told me to bleed the injection pump first. So, I did that, I opened the bleeder and turned the engine over and fuel came out of the bleeder right away then I closed the bleeder and opened the...

DrBt thanks for responding. I am getting fuel to the fuel filter with the bowl off I turned the fuel on, and it pours out tomorrow I will try disconnecting the fuel line to the injector pump and see if I get fuel out that line and then go from there. I will let you know the outcome sometime...

I have a B4200 Kubota 2 cyl. diesel that is not getting fuel to start. I replaced the fuel filter and filled the fuel bowl with diesel fuel then turned the fuel shut off back on. Tractor started no problem and drove about 50 ft. and shut down. Would turn over but not start so I loosened the...

I purchased a X580 in December and from what I can get out of the owners manual and looking around this is what I come up with you can use this or just work from it good luck

A very special thanks to WILL 1988 who suggested I buy a JD X580 and to javjacob and Bertmobile for their comments back on 11-11-22. I bought the JDX580 with a 47" snow blower in December, and this is the first time I have used it for snow and what a great machine even though the snow was about...

having a problem with a white space about 1 1/2" wide running along the length of the bottom of the screen. have it on this forum and trying to register is welding 101 any help would be appreciated

Jimbeau thank you my son and I talked about maybe using a bolt as a stop. First, he is going to try to get MTD to fix it. This tractor is brand new only has 15/20 hours if that.

Jimbeau is this something you made or purchased if you made would you please send some dimensions and how to install My son bought a craftsman T3200 model 13BGA22W093 from Lowes and he has the same problem. Lowes won't help they told him to go to Craftsman and they won't help (after several...

Thank you javjacob and will1988 I am going this morning to put a deposit on a JD X 580 nice tractor I got the 48" mowing deck with vacuum/bags and a 47" snow blower. First mower/tractor purchased new since ever Thanks for the information it was most helpful. I did look at the Kubota's they...

thank you both javjacob and will1988 I will start looking at the 580 and go from there I went and looked at the Kubota's and it looks like they are hard to get supply is limited and prices go up in January. I have lots of time I just sold my 53 Ford pickup, so I have some money and my Agco...

Mechanic Mark helpful site, I have some prices now to take pictures and put the add in the paper no rush I have time thanks again

I have a Agco Allis 918H garden tractor that I want to sell how much do you think I can get for it. all in fair condition Agco Allis 918H SN #? 1681with a CH18 Kohler engine SN#2408207227 rebuilt 122.5 hours ago, 48” mower deck, 36” tiller, 42” snow blower with manual or electric controlled...

Hi guys I need some help in deciding what size JD I will need. In the next few months I intend to purchase a new JD. I have an acer of grass that is flat/slight slope with many cobbled stone curbing for flower beds. I pick up at least 200 bushels or more of mulched leaves every fall. I also have...

mechanic mark I just called the dealer who rebuilt my BGB twice and asked if there is a fix for the retainer ring coming out of the grove and he informed me that the plate assembly (clutch) has a grove in it to fit over the retainer ring. Playing with this before June 29 th just going crazy...

Thank You will let you know as soon as I get the new retaining ring and then the snap ring

Hi guys it is John again with the Agco Allis bevel gear box. I just installed a used BGB from the 70” s, shafts were nice and tight installed new seals but when I went to put the PTO the pivot spring loaded pulley assembly and the retaining ring (#2172206sm) it keeps popping out of the grove on...

I received these replies to my post on Agco Allis Bevel Gear Box and can't make them out they appear to be in a foreign language or just SPAM from EarleSew ШґШ±ЩЉШ·-Ш§Щ„Ш¬Щ†Ші-ШіЩЉШ§Ш±Ш©-Щ…ШЩ„ЩЉШ©-Ш§Щ„ШµЩ†Ш№ from Pornstact said: таджик порно домашнее now this post from Pornstack cannot be found...

Pornstact this is a foreign lanuage and cannot be read sorry

Mervinpeevy and ILENFINE Mervinpeevy I cannot read you post it is some foreign language like Greek ILENFINE I purchased a used 1970's gear box and I am installing it right now, waiting a on a new pivot to come the used gear box is good and tight the old gear box did a lot of damage it broke the...

bertsmobile1 thank you for responding. I thought the more I put in the better chances to get more answers I looked in the bottom left corner and could not find the delete. I do not want to tick any of you guys off for you all do a great job and I have gotten a lot of good information from you all

Hi guys need your help see my post under Simplicity and Allis Chalmers on Agco Allis 918H bevel gear box Does anyone have instruction on how to remove the bevel gear box? I have almost all the bolts out and still it won’t drop down. Does the bolt #157273 stud for the handle to tighten the belt...

Hi guys need your help see my post below on Agco Allis 918H bevel gear box Does anyone have instruction on how to remove the bevel gear box? I have almost all the bolts out and still it won’t drop down. Does the bolt #157273 stud for the handle to tighten the belt from the rear have to come...

Hi guys need your help see my post below on Agco Allis 918H bevel gear box Does anyone have instruction on how to remove the bevel gear box? I have almost all the bolts out and still it won’t drop down. Does the bolt #157273 stud for the handle to tighten the belt from the rear have to come...

thank you but I do not believe I want to rebuild this gear box again bearings were replaced twice so something is wrong inside I think the outer race was not staked and it spun. I am looking for anoter bevel gear box or a parts tractor or even a good running tractor to replace mine thanks again

Hi guys its John again with the bevel gear box (see topics under Allis Chalmers) Well again the bevel gear box let go. I called the dealer he can do nothing for me on the price of parts but will help out with the labor. This makes the 4th time, once I rebuilt the power take-off and twice, he...

Hi guys its John again with the bevel gear box (see topics below) Well again the bevel gear box let go. I called the dealer he can do nothing for me on the price of parts but will help out with the labor. This makes the 4th time, once I rebuilt the power take-off and twice, he rebuilt the PTO...

Bert, Scrub, Star and Rivets and if I missed someone, I am sorry Please don’t let a jerk like this get to you. I have written in a couple of times and fixed a couple of issues by your answer, and I thank you for that. I read this forum every chance I get and think it is great. You only can...

Mark Just got the tractor back today and put the mower on and it ran good. Need to adjust the belt up a little more but ran good. $408 for parts and $420 for labor but what are you going to do. I always did my own work but the older I get the harder it is to do anything and do it right. No...

Thank You I brought it back to the dealer and the driven shaft coming out of the gear box is shot has to be replaced so another $400 for parts and maybe $500 for labor. That makes $1500 in less than a year but I need the tractor for grass and snow has to be done. I am to old to do all my work...

I have an Agco Allis 918H that I had the dealer repair the PTO at a cost of around $600 and it worked good thru the winter with the snow blower on now I have the mower on and having a problem with it slipping real bad, so bad the clutch go so hot it burned my hand. It is at the dealers again...

I have an Agco Allis 918H that I had the dealer repair the PTO at a cost of around $600 and it worked good thru the winter with the snow blower on now I have the mower on and having a problem with it slipping real bad, so bad the clutch go so hot it burned my hand. It is at the dealers again...

Guys I guess I explained this wrong it is called in the parts manual "Bevel Gear & Side Plate group" it is for the POWER TAKE OFF not the transmission as I stated And it says” fill with multi-purpose oil until oil touches the bottom” What I posted I have an Agco Allis 918 H and want to add a...

Guys I guess I explained this wrong it is called in the parts manual "Bevel Gear & Side Plate group" it is for the POWER TAKE OFF not the transmission as I stated And it says” fill with multi-purpose oil until oil touches the bottom” What I posted I have an Agco Allis 918 H and want to add a...

Guys I guess I explained this wrong it is called in the parts manual "Bevel Gear & Side Plate group" it is for the POWER TAKE OFF not the transmission as I stated and it says fill with multi-purpose oil until oil touches the bottom of the stick

Guys I guess I explained this wrong it is called in the parts manual "Bevel Gear & Side Plate group" it is for the POWER TAKE OFF not the transmission as I stated and it says fill with multi-purpose oil until oil touches the bottom of the stick

I have an Agco Allis 918 H and want to add a little oil to the transmission and it states that to use a multi-purpose oil What is a multi purpose oil, the internet says it is 3 in 1 oil but I think that is to light what oil should I use in the transmission? Thanks John

I have an Agco Allis 918 H and want to add a little oil to the transmission and it states that to use a multi-purpose oil What is a multi purpose oil, the internet says it is 3 in 1 oil but I think that is to light what oil should I use in the transmission? Thanks John

Thank you Rivets/mechanic mark and Star Tech You all came through again glad I belong to this forum I will adjust some time this week thanks again

Thank you Rivets/mechanic mark and Star Tech You all came through again glad I belong to this forum I will adjust some time this week thanks again

Thank you Rivets/mechanic mark and Star Tech You all came through again glad I belong to this forum I will adjust some time this week thanks again

Hi guys need your help again Do you have the valve clearances for a Briggs and Stratton JD High performance technology G 4 crankshaft, Model 441677--Type 0130 E1 Code 061003YG this is in a JD LA120 riding mower I looked all over and finding to many different specs Thanks John

Hi guys thanks for the information but no one would have been able to fix this one without being here to work on it Early spring I service the mowers by changing oil/filters/air/ and what ever they need I also pull the battery caps and add water if needed.. One of the caps fell and I could not...

I will do more checking this week. I don't think the brakes are stuck it moved easy when I had to PUSH it back to the shed What is the bypass lever? if that is the one on the back of the tractor to move by pushing yes that is ok. The fan on top of the transmission should that be turning with...