Search results

Temporarily disconnect the mag wire and report what happens.

Not necessarily on a JD but I've seen brake calipers/pads stuck to the rotor.

Makes one wonder how many CA politicians are part owners of a electric grid.

What's that a sign of? This web site is a thread hoarder.

The V-twin on my JD wouldn't start at all until the needle valve was replaced.

If the OEM needle valve is plastic pitch it in the trash and purchase a brass valve.

Has anyone developed a convenient way to lube the sleeve bearing that supports the steering shaft near the pinion gear on a X350?

I thought possibly the more expensive X350 may be a little better than the box store tractors, but I guess not in the seat department. As a test, the tractor has always been mounted and dis-mounted from the right side in its 52 hour life span. Left edge never touched with my butt cheeek A**...

I'll be absent until e-mail notifications is corrected. You folks have a nice time looking for your subject matter. I don't have enough time remaining in life to put up with the hassle.

Don't know bout you but mine doesn't even come close. https://youtu.be/x4Zrh70sQhw

mine doesn't work. how can i fix it?

Possibly some of you remember these screw on fittings that were on the hand pump you inflated your bike tires with as a kid. I've found it impossible to find these locally at auto stores and even checked at a bicycle repair shop. I get the look like what the hell is that. If anyone has a...

Can the screen in the gas tank neck be removed? If so, how is it done?

The X350 John Deere lists a k46 transmission but the D140 spec sheet sold at Lowe's doesn't indicate which transmission it has. Does someone know which transmission the D 140 has or have a link to that information? Thanks

Just thinking, if manufacturers would read some of the forums available to determine what bugs owners / operators the most, how well they could improve their product for so little cost. Riding mowers directed. Example : 1) it just clicks 2) i'm setting on the seat and nothing when i turn the...

I'm having a problem locating a air filter for a Homelite Chainsaw. Anyone have one they would part with or know of another avenue to purchase one ? I've contacted Homelite via phone and struck out. Homelite UT - 10617-A Sr. No. 7F2840120

If brake pads for your old mower become scarce or the economy has you down, they can be made of wood. Oak or Hickory works well.

Something is screwed up. Clicking on edit gets me a new blank sheet rather than my original post I'm attempting to edit.

What do you L B enthusiasts call this one. I'm sure it has a name besides just Lawn Boy.:laughing: The front wheel in the picture is incorrect.

How much is the per hour charge at your Honda dealer for servicing, carburetor cleaning etc?

I need a fuel kit for my GT-2000 and everywhere I look that Echo Mod. number is not listed. What's one supposed to do, buy one close to that number and hope it fits.

for a Briggs Engine. Model 407777 Type 0188 B1 Code 080125 ys I find it impossible. Please direct me to a reliable source other than the John Deere dealer.

Briggs engine John Deere LA-135 Mod 407777 type 0188 B1 code 080125 ys Does the solenoid on this engine screw out ? If so, is there a special tool recommended for removal ?

It seems as if mower manufacturers can not make mowers that will mow high enough. If it will mow 4" someone wants 5". If it will mow 5" someone wants 6" and so on up the ruler. The mechanical adjustments have their limitations so the solution I see is an option of taller wheels at the time...

So there sets my Chevy with plenty of power so why not put it to work. Blades sharpened - deck cleaned. OSHA doesn't need to know everything.

GOD to ST. FRANCIS "Frank, you know all about gardens and nature. What in the world is going on down there on the planet? What happened to the dandelions, violets, milkweeds and stuff I started eons ago? I had a perfect no-maintenance garden plan. Those plants grow in any type of soil, withstand...

I always get amused at this one. Why is it always recommended to clean and make sure the negative battery cable is tight when the positive is usually the one that corrodes?

doesn't have a thermostat. So what? Maybe it'll run cooler, and cooler it does if used in the winter. In fact it can run so cool the moisture is never driven off. That's what that thick milk looking goop is on the dip stick and in the DS tube. Good for manufacturers and bad, very bad for...

With all the posts about " my mower won't crank " " it just turns a little and stops " if you want some entertainment google ( starter amp meter ). You can read everything from " that's impossible " to " you probably can't afford one that will do that ".:laughing: As far back as long time ago...

Has anyone ever found side discharge ( only ) blades for these 100 series tractors? They come standard with a combination discharge / mulch blade and don't do either very well. I had a part number note on my phone a few days ago someone posted but upgraded phones and lost the number. IIR the...

JD LA 135 LE with Briggs 22 HP engine. Bought new in May 2008 with 210 hours at the present time. A few vinyl seat cracks on left front corner. Ready to cut your grass/weeds as soon as I get the blades sharpened. Price $1,200. A new comparable tractor would be the JD D 130 @ $1899.00 list...

How can a lawn tractor have a bumper to bumper warranty if it doesn't have a front bumper?:laughing:

Cold weather and cold engines are often problematic starting whether it be Briggs or other. My 48 Ford coupe was in that category but that's a whole different story and very long. Being the choke doesn't seem to accomplish much in this regard on my Briggs I took it upon myself to determine a...

do all Echos trimmer engines run the same direction. CCW vs CW ?

I'd like to see Honda modify their definition of a dealer by omitting those listed that do not provide service or at least break it down when ask to click sales or service box and state sales only or sales and authorized service center. Of the two in the 73701 area one of those listed does no...

Bought a HONDA EU 2000 i generator and before it used the first tank of gas it already needs partial choke to keep it from sputtering / hunting. I know, you'll say it's that alcohol gas. Screwed it up before one single tank of gas was used ? Gimme a break. Starts on first pull? Don't bet...

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

If we look closely at the picture we can we see that the spacer is proud of the outer race seat. The reason we know the spacer is longer than the distance between the lower and upper bearing bosses is because the spacer is resting on the lower bearing inner race that I pressed in until the...

Are your log in times frequent? Checking the box " remember me " is of no value on my end. It's beginning to get on my nerves.

Back browse does not work after viewing a picture. Clicking here if not automatically redirected does not work after viewing pictures. I must X the site out and re open in another tab. How inconvenient !!!!!

Does anyone have information on efm engines. As I understand it efm in this context is for electronic fuel management. Google is mostly advertisements.

In order to proceed I was ask to log on. Being unable to log on, it seemed to be necessary to apply for an new password as my only choice if I wanted to continue membership. Is it possible to obtain a password of my choosing rather than the mix of alphabet letters and numerical digits?

https://www.youtube.com/watch?v=Xi3p465MN1E

to tie your equipment when transporting. If you do your knowledge of how to tie an improved clove hitch knot will make your life simpler and you can talk normal around clients, your minister, women and the grand kids when it is time to un-tie. Handy for non ratchet straps too.

Anyone using the echo speed feed 400 head. How is it?

Is there an Echo expert in the house that can tell me if the gas tank of an Echo 210 string trimmer has a slight positive pressure when running.

When I view a pic and click back browse the picture remains. If I click on " redirect you line " as asked to do, when back browse fails, that doesn't work either. To get back I must X the site out and go to bookmarks to get back. Can someone help a SeniorCitizen?

Due to the religious propaganda by Chosen, I have determined one of two things need to happen. Either the religious statements can cease or my name can be struck from the membership roster. Please notify me of your decision soon. Thank you SandburRanch

Have you ever had an engine fail because of: 1) a brand of oil 2) the viscosity of oil that was used And could prove without a doubt one of those two things caused the failure. If so how did you come to that conclusion?

this text that appears in a reply ? I知 don稚 haven稚 1970痴