Search results

Go Battery and forget mixing fuel....r

So you really believe it's OK to let it choke with dirt until it starts to run bad then change? I'm sure glad you're not doing my maintenance. Just curious, what does your oil look like?

Hi JC, if you dig around on the site you can find many discussions about air filters. There are even some that will call you thrifty for complaining about having to replace your air filter. There are upgrades available for you air filter box. I took it on myself, couldn't be happier with the...

Bob, you are most welcome, Cheers, Ray

On the real lawn service trailer (not the 10' trailers behind F150s) I see most Exmark, Scag, JD and a few BobCat. Honestly I don't see anything at the BOX stores I'll even give a wink at. I've a near 20 year old Cub rider that has been a trouper but have not intentions of another. I recently...

You know CA puts a cancer waring on just about everything, honestly I wonder how there is anyone left in the Left Wing Slum... Cheers, Ray

Looks nice, you could always get a real mower, go "BobCat". I hope it servers you well, let us know how it does in a year. cheers, r

On my LT42, the seat switch chops the engine, blades have to stop if the motor is not running, Cheers, r

one wire is switch hot when you pull out the switch, the other is ground, meter this out , cut off the connector and hard wire. Or pick up some connecters and replace. This is a five minute fix if you can use a meter and tools. r

If it has a B&S engine on it take it back for sure, r

Bill, what year & size is your CRZ. I have a 2019 48" that I really like, Cheers, Ray

Mr Cook, my engine is an FR651V, do you know if the same items will work on it? r

No ruts here, yard is so hard you can't drive a nail in it.. Never go the same way twice, it actually works,,, r

Anyone got one that likes damp grass???

Sir, when you find one that like damp grass, let us all know..r

I just put a replacement carb on my 455, it would not run slow enough on the minimum setting to not turn the chain. After removing the limiters I set both screws at 2 turns, ended up with the L at ~ 1 and 1/2 and the high at ~ 1 3/4. Saw runs like new. I was surprised to find that one could...

One more reason not to buy another CC...

Why not get the next smaller filter so it will not touch?

Maybe you should go look at something different, perhaps a "BOBCAT" Cheers, r

Man, unless you got some very easy riding, get a tractor.. I'd hate to know I had 5 acres to bounce over on a ZTR. Cheers, Ray

Man you are nice, STUPID is as nice as I get, unfortunately he knows exactly what he is doing and it is not for mine or your good... r

Yep, guess who will be missing from the picture, Sippy Cup Joe...

Shell Rotella T6 5W-40 , I have started running this in all my 4 cycle air cooled engines, they purr on this stuff and run much cooler. r

I would ask what changed? I assume this has not always been an issue.r

Steve, you might look at XHT Blades, sounds like thy are similar to Fusion, working nice on my CRZ, my machine is only 48" and I often find bundles of 3 blades for $30...r

Tell me what you like about your string trimmer. I'm looking for 40v, dual line, bump feed, undecided on var speed or two speed. typically like a curved shaft but will consider a straight shaft. Would prefer it to be easy to load and have decent run time. Thanks, Ray

These work great>...

Anyone else using a "Grass Flap"? I've had some form of shoot blocker on my riding mower for years (one should see the rube goldberg set up on my Cub Cadet) and I knew when I got a ZTR it would be difficult to use a hand operated one. I have many plants and other things in my yard that I didn't...

I've a 2019 Bobcat CRV 48" - the original blades were offset, since then I have run both offset and straight. I don't believe I see a differene in cut quality. I was curious of others opinion of this matter. Cheers, Ray

BadBoy, Toro, Hustler are few I would consider, with alittle searching you might find BobCat or SCAG that you would consider. Cheers, Ray

Toro, Hustler, Bad Boy for a start

https://www.amazon.com/Kano-Kroil-Penetrating-liquid-KROIL/dp/B000F09CF4/ref=asc_df_B000F09CF4?tag=bingshoppinga-20&linkCode=df0&hvadid=80401840125115&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4584001418905955&psc=1 Best penetrating oil on the planet, r

Hustler, Bad Boy, Toro, all I'm indicating is don't let your Google search limit your search for a machine. there are many fine ZTRs on the market that don't show up quickly when you do a Google search. When you search for Best ZTR you get crap for results !! (I don't think anyone on the forum...

Neither, look at somethng better than a Big Box brand.. r

Move, that's my plan anyway, r

You might try KROIL, best penetrating oil you will find, it loosens stuff I thought never would come apart. Remember, use sparingly, the part that runs on the floor does not work...r

https://procheminc.com/products/no-seize/

I vote Cub Cadet XT3

Gentlemen, I know there are plenty FR series units in service that could benefit from this item>...

Here's a list of filters that will work, WIX 57035 32 micron (2.3 tall) WIX 51056 21 micron (2.7 tall) 51348 (3.4 tall) WIX 57148 5 micron (3.4 tall) PH8170 I for one prefer the WIX 57148, Cheers, Ray

Here's a list of filters that will work, WIX 57035 32 micron (2.3 tall) WIX 51056 21 micron (2.7 tall) 51348 (3.4 tall) WIX 57148 5 micron (3.4 tall) PH8170 I for one use the WIX 57148, much better than the OEM filters, Cheers, Ray

If it is a older machine don't forget the frame end of the negative cable....

I would just add, think about the maintenance that goes with a ZTR. Might consider a deck that raises so deck service, blade sharpening are easier or you'll need a jack or you'll either have it picked up or be able to haul it yourself. My yard is 1.5 acre, cut it for years with a 38" rider...

Tell us about a Ferris, I see it has rear swing arm suppension? I would like to see a diagram of this arrangement. I read it has greasable spindals, I don't see this a plus. On my BobCat CRZ that would be hard to reach. Cheers, Ray

The Lion Rocks !!!! Welcome

Looks like allot of money for a Briggs & Stratton engine?

Please do not, it kills folks cats and unsuspecting bird life, see my update further down..r