TORO Recycler losing oil - not from oil tube

idriv442

Forum Newbie
Joined
Apr 15, 2018
Messages
4
I just purchased this Toro used. I t was cleaned and dried by previous owner. I brought it home and filled the gas and topped off the oil. About 20 minutes goes by using it and I see oil leaking out the side of the motor. I have attached pictures. Do I need to pull it apart or is this an easy fix. I tried searching, but mostly found oil tube leaks.

Motor: Tecumseh 195cc
Model LV195EA
 

Attachments

  • IMG_20180415_113936.jpg
    IMG_20180415_113936.jpg
    354.5 KB · Views: 17
  • IMG_20180415_113949.jpg
    IMG_20180415_113949.jpg
    201.4 KB · Views: 20
  • IMG_20180415_115931.jpg
    IMG_20180415_115931.jpg
    143.1 KB · Views: 20
The best way to find a oil leak is start with a very good cleaning. Then run it and keep watch around the area of the leak to find it.
 
And while it is till damp a good dusting with talcum powder or something similar.
Let it dry off so when you start up you will have a nice white coating for the oil to bleed through.
 
It was clean and dry to start. The oil is coming from above the threads in the picture.
 

Attachments

  • mower motor.jpg
    mower motor.jpg
    145.3 KB · Views: 22
Thanks, I actually already have it ordered and in the mail. Just waiting for it to show up.
 
While youre tearing it down, I'd stick in the oil seal at the bottom of the engine
 
Is that a scratch on engine side you have circled or a crack ?
 
Back
Top