offroad mower
- Thread starter zig3
- Start date
Carscw
Lawn Pro
- Joined
- Aug 11, 2011
- Threads
- 66
- Messages
- 6,375
Not sure how good the frame would hold up as just one 2inch pipe holds the front to the back together. But they are easy to make go fast but chews up the clutch disk fast.
Best old snapper rer to use would be 1642. It was heavy duty with a 42 inch deck. But still to light in the front you would not be able to turn in mud or going faster than stock
Sent from my iPhone using LMF
Carscw
Lawn Pro
- Joined
- Aug 11, 2011
- Threads
- 66
- Messages
- 6,375
Yes same as you would on a craftsman.
Was just playing with my MTD garden tractor put bigger pulley on the front only goes 16mph going to try a smaller one on the back tomorrow hope to get over 40mph.
If that don't work I am going to put a 7 speed craftsman rear end under it.
Sent from my iPhone using LMF
metz12
Well-Known Member
- Joined
- Nov 24, 2012
- Threads
- 49
- Messages
- 892
thats sick. i wish i had tractor parts laying around like you do.
Carscw
Lawn Pro
- Joined
- Aug 11, 2011
- Threads
- 66
- Messages
- 6,375
If its a hydro don't do it. Won't last but a couple hours.
I don't lock mine at all I like to do donuts.
Going fast is what I live for.
Racing is the only sport that you have to have two balls.
Sent from my iPhone using LMF
Carscw
Lawn Pro
- Joined
- Aug 11, 2011
- Threads
- 66
- Messages
- 6,375
Took me years to get them all.
I would get one here and there but now my wife says I am out of control.
I spend way to much time building things.
Sent from my iPhone using LMF