Husky 322L won't start

[grnd0]

Trimmer has very little run time and always starts in 2 or 3 pulls. I decided to put a speed feed 400 on it and after I got done it won't do anything. Had it upside down to put the speed feed on and I can't figure out what happened. Has Spark and seams to be getting fuel. Took carb apart, everything looks perfect. Help.......

 

[grnd0]

Figured it had to be something with carburetor, but how just by having upside down. Got a $18 one on Amazon, 3 pulls and runs like new.

 

[DaveTN]

Most of the time a mechanic in a busy shop will just swap out carbs as
it takes too much time and $$$ to tinker around with one, boil it out etc.

 

[StarTech]

Most of the time a mechanic in a busy shop will just swap out carbs as
it takes too much time and $$$ to tinker around with one, boil it out etc.

Besides most don't even have the knowledge of how to repair the carburetors. It is a shame that our industry tech are becoming to a just part replacer and hope it fixes it problem techs.

Sometime I clack it up to the techs just being too lazy to learn something new but some techs I have dealt with over the years couldn't figure their way out of wet paper bag with both ends open.