Husky 322L won't start

grnd0

Forum Newbie
Joined
Sep 27, 2022
Threads
1
Messages
2
Trimmer has very little run time and always starts in 2 or 3 pulls. I decided to put a speed feed 400 on it and after I got done it won't do anything. Had it upside down to put the speed feed on and I can't figure out what happened. Has Spark and seams to be getting fuel. Took carb apart, everything looks perfect. Help.......
 
Last edited:

grnd0

Forum Newbie
Joined
Sep 27, 2022
Threads
1
Messages
2
Figured it had to be something with carburetor, but how just by having upside down. Got a $18 one on Amazon, 3 pulls and runs like new.
 

DaveTN

Well-Known Member
Joined
Jun 12, 2011
Threads
16
Messages
668
Most of the time a mechanic in a busy shop will just swap out carbs as
it takes too much time and $$$ to tinker around with one, boil it out etc.
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
75
Messages
10,109
Most of the time a mechanic in a busy shop will just swap out carbs as
it takes too much time and $$$ to tinker around with one, boil it out etc.
Besides most don't even have the knowledge of how to repair the carburetors. It is a shame that our industry tech are becoming to a just part replacer and hope it fixes it problem techs.

Sometime I clack it up to the techs just being too lazy to learn something new but some techs I have dealt with over the years couldn't figure their way out of wet paper bag with both ends open.
 
Top