Cheap Chinses Carb

2ball

Well-Known Member
Joined
Jul 29, 2020
Threads
27
Messages
134
So I bought a new needle and float and installed them. I have not tested them to see if they are functioning property.

I did cut grass when the needle tip was broken off, so I assume the needle was not working at all at that time. The mower ran properly and I shut off the fuel as soon as I was done.

Do I need to change the oil because I ran the mower without a properly working float?, or will it be ok, because the needle does most of the work when the engine is off?
 

slomo

Lawn Pro
Joined
Jul 14, 2019
Threads
78
Messages
5,134
So I bought a new needle and float and installed them. I have not tested them to see if they are functioning property.

I did cut grass when the needle tip was broken off, so I assume the needle was not working at all at that time. The mower ran properly and I shut off the fuel as soon as I was done.

Do I need to change the oil because I ran the mower without a properly working float?, or will it be ok, because the needle does most of the work when the engine is off?
Definitely on dumping the oil. Maybe 2 or 3 times to get all the fuel out.

That needle works all the time just like a toilet in your house does. Yes it needs replaced and the seat cleaned/replaced too.
 
Top