Search results

Since you’ve let it run that dry of lube, most likely with the weight of the mower pressed down on the bolt and sleeve, a notch has worn in one or both pieces keeping it from coming out. If you remove the yoke assembly wind turn it up on its side everything may move back to center enough to...

some were under the seat, some were on the fender deck between your leg, by your serial number I think yours is between your legs

Kinda sounds like the bearing in the BBC lower half is locked up and it’s trying to turn everything with brake on

there is a kit (GY20978) that has the above new style arm and a new lever too, If I remember correctly, both were beefed up

Kinda looks like the one at the bottom of the PTO lever #13?

Stump jumper, contact info in your private messages not sure what you were looking at, but there is only one service/technical manual, there is a serial number split at 120,000 for the owners manual

got it

I do, check your messages

there was a serial number break on the 14PZ owners, I have PDF's of both, I bet, looking at both owners manuals you will find what is different to help you ID it better. I also have a PDF of the parts manual, message me your email if wanted

don't know anything about them except it is the bottom entry level Deere rider, mostly sold by the big box stores John Deere S100 17.5-HP Side By Side Hydrostatic 42-in Riding Lawn Mower Mulching Capable Model#BG21271

yes, that's the latest number for a complete BBC clutch, that's the only way it's sold now. you might be lucky enough to find a junk JX75 or a late model 14SB to rob the lower piece from

As you're hunting for parts for this, it was a model 22R, Kawasaki used three carbs through the years, their ID numbers were 12497, 12702, & 32113 all carbs used were superseded to Deere part # AET10909 (32113) usually the number was on an outer edge of one of the mounting flanges, but I have...

manual link sent, the correct owners manual (serial number dependent) can be downloaded for free at - Deere manuals download

on the way

on the way

check your mail messages

looks like the bottom section of #3 (RH fan guard), maybe it vibrated and cracked?

mighty heavy deck to remove just for blades

Just not much of a wheel, but as stated above, it’s not for setting height, re-read your mower deck manual, very detailed instructions for setting height

Sounds more like anti scalp wheels that shouldn’t be used for setting mower cut height Wow! Just spent some time looking on Deere parts and their sales site!, piss poor design!, In the past they never ever had a height wheel with out some type of bearing and lube. There is just way too much...

60" deck parts book click for book

there is a "ratchet" inside the workings of the rear wheels, a spring and key (#28 & 29) fit into a slot on the axle shaft and a gear with a one way ramp fits over them. when driving forward, the key catches a place on the gear and powers the wheel forward, when pulling back, the ramp inside the...

You answered your own question, you have a 1987 12PB Deere mower, a very nice mower in their day!

see if this helps, if you can't view, let me know and I'll do something different tonight when I'm home cable pictures

the manual I have is for the model 160, the "LT"160 is a newer model that I don't have manuals for

10A or 10B https://photos.app.goo.gl/EZazJc9gghytHAiS8

done

sent

sent

check your PM's

download link on the way shortly Joe

on the way

if I remember correctly, the Ogura and the early Warner clutches didn't come apart and were serviced as a unit

done

on the way

38-INCH MID-MOUNT ROTARY MOWER 1986 MODEL (SERIAL NO. M00664X537001-555000) (210, 212, 214, 216, 316, 318, 330) there were serial number breaks, and you must also pay close attention to the model notes in the parts books as many times the picture used was for more than one series...

i found this googling - Did you know that Walker has a kit and two parts that could be used to repair a broken catcher? Kit# 8515-9 goes between the catcher and the catcher support frame. Part# 8515-13 goes on the left and part# 8515-14 goes on the right. These parts and kit sandwich the lower...

download link on the way shortly Joe

valve covers did tend to leak, along with dipstick tube o-rings and with age the oil pan end crank seal as there is no true crank bearing. They ride on a machined taper in the cast aluminum oil pan and it can wear. message me your email, I can help you out with the PDF

wow! sorry for the size! at least it's easy to read!

see if this is what they want, happy to scan any pages they need

all the parts book states is - 120 HYDROSTATIC TRACTOR 12 HP K301AS BALANCED KOHLER ENGINE 1970 MODEL (SERIAL NO. -007500) 1971 MODEL (SERIAL NO. 007501- )

your main bagger assy is a 2000 year model - 2000 Model (Serial No. M02665X170001-175000) your two parts manuals are Bagger Assy in parts manual #PC2130 Power system,motor,fan is in parts manual #PC2112 you should can view both of these at JDparts.com, if you have trouble finding them...

download link on the way shortly Joe

you should find two of these in the tank lines under the machine https://cdn-assets.colemanequip.com/images/parts/uploaded/med/3759-12581-43012.jpg

sweet ride!!!

the 110 was built in three versions through it's long life, the oldest was the serial numbers under 100,000 the middle was 100,001 through 250,000, and the last built were 250,001 and up. I have all three service manuals in PDF's if you let me know which you have and shoot me your email, it's on...

should be one of those push and turn valves on the side to drain it, still wonder if that's the original engine?

just so you're aware, that model wasn't build by Deere for Scotts, it was built by Murray you can look up the parts here - https://www.partsandservice.com/html/Murray/lt/lt50567x8.html