Search results

okay I tried the screwdriver and still doesn't fire it right off also as a side note I have a solenoid with two red wires (cables) on the positive post and the black ground on the other post

okay so @StarTech and @johniii so today I got the new terminal in housing etc and it fired right off several times in a row but then back to the not firin up..I started noticing on the starter that the gear with the teeth is only going all the way up properly every so often and then it starts...

yeah that was the issue with the old terminal,it would just come right out of housing with the slightest pressure

@StarTech okay I found an old terminal in the garage the correct size. It has about 4-5 inches of wire already attached to it. My question is Could I just strip some of the B wire and use a crimp connector to attach B wire to the wire attached to the terminal I found?

yeah thats what i'm wondering when i tinker with the armature it fires off perfectly then a lil later won't turn the engine over

also is this the correct terminal for that rotary housing...

and that housing you showed me from rotary will fit into this ignition switch?

I sure appreciate your help

would this also work? @StarTech https://www.amazon.com/HD-Switch-Ignition-Husqvarna-539107541/dp/B08HL8FRHP/ref=sr_1_3?crid=EY6VPMVQPNSO&keywords=husqvarna+ignition+switch+kit&qid=1689293363&s=lawn-garden&sprefix=husqvarna+ignition+switch+kit%2Clawngarden%2C116&sr=1-3

this is the one I have

it looks kinda like the red one but no matter how far I try to push it into the terminal hole it goes in maybe a 1/4 of the way?

hey @StarTech I got those connectors but theyre too big to go far enough up in the harness?

think the wire is bad going into the terminal connector? its kinda kinked due to pushing back up into the harness

yeah a fuse by the battery and solenoid its okay

there's only one fuse on my mower I believe and it's okay

@StarTech I got my tester light out and the B had no power to it with the key on or off? I even pulled it out of the harness and touched all around the connector and nothing

thank you sir ordered it from amazon now if i don't screw it up changing it out lol

so yes on the amazon one?

or this one?

would this work?

is there another name they might go by? And is it 12 gauge? Tysm

tha can i use existing wire with new terminal or a whole new harness?

Okay so lately my mower will start up fine and run and then it won't start..Every time it starts it runs and mows great. My question is this evening I found that on the back of the ignition switch where the harness plugs in to switch the Pinkish/Red wire isn't staying in the slot tightly,meaning...

33r777-0003G1

no but a machine shop is going to extend it

Briggs stratton 18.5 intek The top rocker arm stud hole has stripped out..Tried a helicoil and loctite but it has vibrated loose.. The hole has an open back to it,meaning the hole doesn't go into the head I was wordering if i could use some kind of locknut on the backside? Thanks in advance

well the head is still on the engine in my mower

Okay so I believe it's a 1/4 x20 ? Correct? How do I know which type of insert is best? I mean after I select 1/4x20 it has all these different options? thanks

okay thanks kinda what I was thinking but thought id ask first

Hey so I have a 18.5 hp Intek Briggs Stratton on a Husqvarna mower and the hole that the rocker arm stud bolts into seems stripped out? The threads feels good at first but towards the end of the bolt it just keeps turning and won't catch threads..What can I do about it? I tried my tapping tool...

Okay thanks I reported them..Sorry about that can you help me now? lol I'm thinking it may come down to the armature magneto bc flywheel is rusty? Should i clean the magnet on flywheel and check the gap on magneto? Thanks

I know I'm not seeing an option to delete them

I have a Husqvarna yth1842 with a 18.5 Briggs and Stratton intek and I've run into a starting problem..The mower will fire right off and run smoothly but then it might not start the next time? Has a new battery,starter,solenoid,ignition switch..It almost seems like there's a bad connection...

I have a Husqvarna yth1842 with a 18.5 Briggs and Stratton intek and I've run into a starting problem..The mower will fire right off and run smoothly but then it might not start the next time? Has a new battery,starter,solenoid,ignition switch..It almost seems like there's a bad connection...

Have a yth1842 with a 18.5 Briggs and Stratton intek and I've run into a starting problem..The mower will fire right off and run smoothly but then it might not start the next time? Has a new battery,starter,solenoid,ignition switch..It almost seems like there's a bad connection somewhere? I...

yes just saying that they were gonna charge $400! Valve adjustment isn't a $40 job much less a $400 job...It is a common thing with small engine shops and repairmen! They tell someone it's a "compression" issue and a lot of people take their word..

Just a heads up about compression issues..I have a Husqvarna YTH1842 with a Briggs and Stratton intek engine. Shops and mechanics are quick to say it's a compression or compression release issue..I was told $400 to fix my mower when in reality all it cost was watching a youtube video and...

LOL got it home today everyone and guess what it was? The stupid seat safety switch was shorting out! Runs like new now FK them and their "$400" resolution

Hi i have a Husqvarna YTH1842 with a Briggs and Stratton 33r777-0003G1 18.5 intek. Got it out to use this spring and was having problems starting so I bought a new battery,starter and solenoid with no luck! Had it looked at and was told it was a compression issue a release or something? Anyway...