Search results

I used hunter green. You can unbolt the engine and put a strap on it and lift the engine up letting the pulley support the weight of the mower and jiggle the mower around. Spray some pb blaster on it. I find that it is best to maybe just get a new pulley and get the old one off anyway...

Does this help?

This is my deal today found it in a foreclosed house we trashed out. 1954 Roth cornet Easy $100. Sad to say no mowers today

All the bread is gone at walmart

This is a rally with atv rear tires off a 110cc Stock engine pulley and a 3inch rear pulley 17.5 hp Not real fast maybe 20mph but a whole lot of fun in the mud

Lady sent me this pic asked how much I would charge her to haul it off for her. It's a 1979 and she has the deck. I am going to be nice and GIVE her $50

See if this will help. 2009 was the last year they made the lts2000 model 28908 it's now a 28884

That would be off a old NOMA This is what a new aftermarket one looks like. Also was used on some TORO's

eBay 25ft $85.00

Picked up 12 for $2.50 each I told the guy the sell for $30 he said then but them all.

Does it look like this one? Ford 120 k301

If your going to plow snow do it in style.

1957 140 Runs and everything works. Did not even try to talk the guy down in price

Here is a homemade electric mower.

This old rally I run 115 octane has a 17.5 Tecumseh been bored 40 over with a Keith black piston. Getting about 25 hp

Not sure how he did this maybe texting and mowing

This is how you do it

This is what the end result when try to push a mower beyond what it was made to do

Here is a good guide to go by

I have always wanted to know why they use sealed bearing in blade spindles and not a two piece roller bearing. So here is my test. Putting bearing and a race in a mtd housing with a ayp shaft ( yes I use mtd housing on my ayp decks because they are better ) First test was to press the race...

My cheap cub cadet cuts yards like this all day with the deck set 2 from the top at about 3/4 speed.

Missed this deal by 5 mins $30 for both and they run

This is what they look like but most are primer red

Junk Deere propane kits http://m.deere.com/wps/dcom/en_US/corporate/our_company/news_and_media/news_and_media.page

The rally got a fast bath cleaned up good. New filters and oil and some grease. It has a newer Tecumseh 17.5 hp I cut for around 30 mins rides and cuts good

Just picked up all three for $150 all 3 run and cut. All tires are like new worth the money just for the tires.

Not sure I can stripe this one. Had to cut a path just to walk around to give a bid.

This is the ryobi kit I have used it on other brands

Let me know if this helps you

Today with the 206 yth2448 husqvarna Not bad for weeds

Just playing around with my 1990 mtd First time in 7 months that it was not raining when I got to this yard

I washed this 3 weeks ago and have not used it in a week (( cowboy up and get over it ))

Today was my lucky day found this In a back yard of one of my HUD homes. Only thing missing is the chute. (( cowboy up and get over it ))

Mine says you can run synthetic I run 10w30 and change it every Saturday and filter every two weeks (( cowboy up and get over it ))

This is what it looked liked before Same mower before the custom work (( cowboy up and get over it ))

The model number I came up with from what you have me is 13WN77KS011. I hope all this gets you up and mowing again (( cowboy up and get over it ))

Ok this is what the rod should look like with a little bend on the end. So yours has. Broke. You should be able to find one at a repair shop or order one on line from. Parts tree.com. The part number is 747-05105. (( cowboy up and get over it ))

Hey man I don't know if this will help or not. If it don't give me your model number and I will get you what you need (( cowboy up and get over it ))

They are called snapper high lift blades you can still get them but I would not use them on a new model mower. It is made for pro use on a pro mower. If you want a thicker blade you can go with a Oregon snapper mulching blade ( not a gator ) You can bag or discharge or mulch with them...

As you can see in the two pics they are not designed even close to the same. We all know how gator blades work the fins push the grass up and in. The cub mulching blades don't seam to do that as I can throw the grass across the road. My biggest reason for using gator or the cub mulching...

He gave me two cheap $5 bearings to do a test Cub cadet gets $16 for this spindle bearing I got better ones at $25 each told him a wanted the medal seals not the rubber. He said no you don't the rubber seal ones will last longer because they won't let as much crap ( not his word) into the...

Cleaned it with my pressure washer 2 days ago. I might just give up on it (( cowboy up and get over it ))

Found this for sale $6000 Going to look at it. No will not buy it. (( cowboy up and get over it ))

Here is a old tractor. I know a couple will know what it is even with some parts not on it. And yes it still runs. (( cowboy up and get over it ))

Ok looks like I did not read it correctly. It's said MAY not WILL that would be my dyslexia kicking in. (( cowboy up and get over it ))

The steering shaft sits in this at the gear end. I guess some would call it a bearing hex flange Why they just don't use a bearing I don't know (( cowboy up and get over it ))

I have a old bc30 that has plenty of power. I can not even guess how many hours on it This is the new model I have 2 You can buy this with a trimmer shaft (( cowboy up and get over it ))

Can't pass this up for $80 (( cowboy up and get over it ))

Worked the cub cadet hard today. (( cowboy up and get over it ))

Cutting Options 2-in-1 (Side-Discharge/Mulch) Material 14-Gauge Construction Welded Blades 1 Blade Positions 7 Positions Cutting Height 1.25-4.0 Inches Front Axle Stamped Steel Front Tire Size 8 Inch Rear Tire Size 10 Inch Tire Type Solid Rubber HP/CC 190 cc Torque 8.5...