Search results

This is my Deere. Very well built. It's not that I do not like jd

This was one of the easy ones.

Here are two from today Can't make them all look perfect just a lot better. My old husqvarna 2448 has been working hard.

This will also help

This is what I use. It is the best stuff. I use it on my mowers and my race car. It's all any one at the track uses

I have a 1981 ace hardware made by MTD I use it as my brush mower. I cut 12 yards like this every day with my cub. Put over 1000 hours on it last year. Paid $1200 for it new sold it last week for $750. The junk Deere in the $1500 price range will not even get this yard done.

Have a peerless/Tecumseh transmission model number. 4988-p1. Replaced both shafts and all gears but the little beveled gear that sits on the pulley shaft Reverse 1st and 2nd work ok but a little slow to engage. 3rd and 4th will turn the output shaft until I release the brake and try to move...

Have a kohler cv14t 1497 Need number for a carb kit. It is on a snapper walk behind. Maybe from 1998

Alabama security

A friend sent this to me asking if it is worth it. I think it is what do you all think. http://chattanooga.craigslist.org/grd/4366875025.html

This is what I do with my cub. I get 2 to 3 yards a week like this. The way they design the deck and the pulley set up let's this mower power thru tall grass.

80% restored Has the. Original briggs 16 hp twin side shaft. Maybe a good deal for the right person. What do you think he is asking for it?

Ran out of edger blades once and put one of these on. Works good for drives that are over grown from not being edged in a year.

This is a Safegaurd job today. I would think with just a Business license you would be ok.

Does this help????

I try to get every mile I can out of a tire

I was taking to race cart engine builder. He showed me a fail proof way to adjust valves. I know this will start a big thing just like what oil to use so I tried it on 6 different brands and hp engines. Then checked the valves the way the manufactures manual said to do them. All valves were...

Have to love a old cat engine. This one was on a sand dredge for 23 years. Run this engine wide open. Been under water about 10 times

Everyone should know this one.

Have 2 ryobi trimmers that the coil went bad on this year. I made a comment about them on the ryobi Facebook page. They sent me a email asking about it I told them how much I use the trimmer. He told me even tho it is not considered a commercial unit it should still last. And is sending me...

30 mins of my time putting a starter on a f-150

I got this back in sept started it once and put it up. Was going to fix it up this winter but just have not had the time

Just now picked this up $130 To heavy for guys wife to use. Only a couple hours on it

A sand dredge sucks the sand off the bottom of the river. The one we built has a big Cat running a 12 inch intake 10 inch discharge pekor gravel pump. You move around the river with cables going to both sides of the river. Whenches ran by hydro. The sand and water and what other trash it picks...

Give this old tractor a try.

So a guy sent me this pic said only used a couple times. Will sell it at a good price. Then said he wants $300 for it. I was nice any only said a couple cuss words. Told him $25

No way I would pay $50

This is how it looks on mine. But if I just hit on the text it self anywhere on the page. This does not come up. Brings me to where I can type without the risk of hitting the dang report

I used hunter green. You can unbolt the engine and put a strap on it and lift the engine up letting the pulley support the weight of the mower and jiggle the mower around. Spray some pb blaster on it. I find that it is best to maybe just get a new pulley and get the old one off anyway...

Does this help?

This is how they do it in Alabama.

Well you can now get high but need a doctors note to buy sex toys.

This is my deal today found it in a foreclosed house we trashed out. 1954 Roth cornet Easy $100. Sad to say no mowers today

Here are some pics of me and my son scrapping one of our sand dredge setups.

All the bread is gone at walmart

History does repeat itself

This is a rally with atv rear tires off a 110cc Stock engine pulley and a 3inch rear pulley 17.5 hp Not real fast maybe 20mph but a whole lot of fun in the mud

Lady sent me this pic asked how much I would charge her to haul it off for her. It's a 1979 and she has the deck. I am going to be nice and GIVE her $50

See if this will help. 2009 was the last year they made the lts2000 model 28908 it's now a 28884

That would be off a old NOMA This is what a new aftermarket one looks like. Also was used on some TORO's

eBay 25ft $85.00

Picked up 12 for $2.50 each I told the guy the sell for $30 he said then but them all.

Does it look like this one? Ford 120 k301

Does anyone have a clue what this is?

If your going to plow snow do it in style.

1957 140 Runs and everything works. Did not even try to talk the guy down in price

Here is a homemade electric mower.

This old rally I run 115 octane has a 17.5 Tecumseh been bored 40 over with a Keith black piston. Getting about 25 hp

My wife and a deer And if course with a craftsman Just came walking up

Not sure how he did this maybe texting and mowing