Search results

When I was young, my dad bought a new Sears riding mower. It was, compared to today, a bare bones machine. It was 8hp, 3 speed transmission, pull start, etc. That 8hp mower would cut through the highest grass without bogging down. It would climb some serious hills, too. And if I would put it in...

Thank you, sir. I wasn't aware that it would be so difficult. I can access the nuts in question from behind the engine, and if I could break them loose without removing the steering gear sector it would be so much easier. But these are the original ones, so I guess I shouldn't be surprised that...

Nothing "secretive" here. You used the correct model number. The nuts on the steering spindles weren't this difficult to remove. Was loctite not used there as well as the steering gear sector? I guess it would be easier for me to remove the steering gear sector. It would be much easier to...

This is for an Ariens 20hp B&S with a 42" deck. There's supposed to be bushings on the bolts where the drag links attach to the steering gear sector. I am replacing the drag links, and I see that the bushings aren't there. Are these a necessary item? Also, I'm having serious difficulty...

That makes sense. 3/4ID washers are easy to find. Thanks 👍

I appreciate that info. I tried to locate washers with the 25/32 ID, and they are very difficult to find. I don't think I have a drill bit that big, though.

Thank you, sir.

Lol, if their brains are working? I don't know where the local Husqvarna dealer is. Stores like Tractor Supply and Family Farm and Home sell Husqvarna. I don't know if they are considered a dealer.

It's definitely missing those. Is this something I can pick up at a hardware store? In fact, it's missing the item 6, as well.

Are we talking about the same thing? I'm asking about the wheels where they ride on the steering spindles. I'm sorry if I don't understand what you mean. I have replacement bushings for the king pins. The wheels slide back and forth on the portion of the steering spindles they ride on. They...

This is on a model 936042. The front wheels are tight on the axles, but there's lots of room to slide back and forth. Should it be tighter? Seems like about 3/4" of travel on both wheels. When I bought this lawn tractor, some things were not assembled correctly, such as no thrust washers on the...

I guess I need to know how much play is expected. I know it should have some play, but since the axle is attached just in one place, I suppose there is some play expected. It just seems like more than it should be. And since it's the original bushings, and never been lubed, I would think there...

How are things down under? I don't watch much main stream media. I pay more attention to bloggers. It does do that seesaw thing, but luckily the frame doesn't allow it enough room to move but slightly. I guess I could check it closer for looseness.

May I ask where you are? I just bought both drag links, and with shipping was under $50.00. These are the OEM pieces. From Ariens they were cheaper than some other suppliers. Have you seen the adjustable drag links? The rod is threaded on both ends, and has threaded ball joints at each end. I...

Try this again, using my laptop. The frame doesn't seem to be damaged, and the wear to the axle and the frame seems negligable. But, if it weren't for the frame, the axle would shift back and forth much more than it does currently. The pivot bolt is tight, but there's a lot more movement than...

OK, I took some pictures, but I can't seem to get them to post. Keeps telling me the files are too big for the server. Any ideas?

Tall order, but I will do what I can.

What photos do you want? The axle pivot bushings, or the play in the axle?

But shouldn't it be tighter? It's definitely moving at the pivot bushings, and not just up and down, but back and forth, also. Makes a lot of noise when it contacts the frame.

Well, I can tell you that the axle pivot bushings have not been serviced. I only service what the manual says to service. I'm the original owner, so the bushings are original. The axle does pivot up and down, but it also moves forward and backward and contacts the frame when it does. I'm not a...

Well heck, that ain't right! I need some more info, if possible. I just jacked up the front of the tractor and checked the play in the axle. It easily moves back and forth in the portion of the frame where it sits. It moves enough to make contact with the frame on both sides. Can I assume that...

Apparently you're correct. I would think that at least some of those you mentioned would have come up in a search. I will look into those sites. Thanks 👍

Thanks folks, I really appreciate it.

Can you possibly advise where I can get these in a pair? It's been quite difficult to locate just one. Is there maybe a cross reference for the same part? I assume it's used in other makes and models. The Ariens part number is 21546336. I tried doing a search on the internet for a cross...

By the diagram I assume that 2 bushings are needed? So far I've only been able to locate them in a single bushing.

I'm already replacing the 74's. I am inquiring about the 67's. I figured it would not be such an easy repair. I've had this mower for numerous years now, and never changed any of these bushings. There's a lot of play in the steering, and I have a toe out situation, too. I have new steering...

I suppose this is a stupid question, but how can I tell if this bushing is bad? Will there be back and forth movement? Is it difficult to replace? This is on a 20hp 42" Ariens tractor, model number 936042. Thanks

I will have to check that out, sir. Thanks ?

Thanks! Nothing stuck in the pulleys, and it's a new belt. The pulleys are the original ones, so maybe they need replaced. Can you please explain what #4 is? Thanks ?

Thank you very much for your help. The brake/clutch pedal shakes slightly while the tractor is running. No big deal, I was just concerned about something being worn.

It's 936042, Ariens 20hp 42" deck.

Yeah, I knew that the brake was internal to the transaxle. I was just curious about if there's any adjustment to the brake pedal. I assume that would somehow affect the clutch, since they are one in the same pedal.

I meant to ask, is there an adjustment for the brake?

I will do that. Thank you!

Well congrats on the weight loss. Get a tighter belt ?. I've got everything back together, but the mower doesn't want to move like it used to. Do I have a air bleed issue?

I just installed a Husqvarna repair kit for the transaxle mounts, along with a low hours K46 transaxle. I changed the fluid before installing it. I also replaced the drive belt since it was the original one. When I started the mower, it wouldn't move in either forward or reverse. I checked the...

Where are you if you don't mind me asking?

Are the self tapping screws that come in the kit grade 8? Or should I look for replacements locally?

Are the screws that are in the kit any better in quality?

By the way, is it a common occurrence for the self tapping screws to fall out of the torque bracket on the front of the transaxle? From what I can see, the holes are stripped. Is there any way to repair something like this, or at least prevent it from happening again?

Ya know, it's kinda embarrassing to admit, but have a welder. I've never taken the time to learn how to use it, and this would be the perfect time to use it. I've already ordered the kit that Husqvarna offers. I need to get some scrap metal and tinker around with the welder, though.

Thank you, sir. You've been a great help.

Yes, I have the vertical one. I think I have located the kit you're talking about. Can you advise how it's installed? Do the old mounting ears have to be removed?

Don't mean to sound ignorant, but what's the drawbar?

At least you were able to track it down. Good to hear.

Don't mean to hijack the post, but is there a kit available for repairing the mounting ears on the frame?

Here's the pictures. Not sure of the quality. I hope it's good enough.

After I got the transaxle dropped, the front mount didn't have any bolts attaching it to the transaxle.

Oh, OK. I hope he didn't just drop out of the group.

Kirok, did you ever get it figured out?