New profile posts

Hello ! I am lawnmoer joe.

Hello, I am new to the site, I have a John deere lt180, the deck height adjuster and the pedal used to raise and lower the deck will not go past 3 on the dial, any help would be appreciated

Muhammed, My posts are not being posted on time nor fully are cut short. Thanks, Mark mechanic mark

did you ever figure out the problem with your mower? I'm having the same issue

Try running another ground wire from negetive side of battery to engine block, sometime they will loose a ground and this is a good way to find out.

D105 Auto

I need a replacement B & S 690656 intake valve retainer for 28M707. This is not available in Australia or not able to be posted from the US. Any suggestions? Alternatively, does the split retainer for the exhaust valve fit the inlet valve?
Thanks PaulD

Oh yeah, my email is:

<email removed>

A separate question has to do with the PARKING BRAKE. The beeper stays on while I'm mowing. I figure it's a cable adjustment. I'm on pp 14-5 in the Manual. Maybe it's the PARKING BRAKE SWITCH. After all, this puppy was bought new back in '91 and I have my fair share of aches and pains at my age. How should I approach this issue?

Hello Robert!
I have a Honda HT-R3009 and the Honda Shop Manual. I'm on pp 11-3, CUTTER DECK. The exploded view shows the TENSION ROLLER above the TENSIONER ARM. My vbelt is wedged under the TENSION ROLLER and I can't quite figure out how to raise or get the ROLLER off the mounting post. How do I raise the ROLLER so I can remove the vbelt?