Walker overheated

cdwatt54

Forum Newbie
Joined
Jul 14, 2024
Threads
1
Messages
3
I have a walker MTGHS serial number 121299 with kholer motor. It has been overheating the last couple of weeks. I have pulled off the back plate that guards the oil cooler and cleaned it. I have checked fuel pressure and it does maintain at 39 to 40 psi. New oil and air filters have about eight hours on them, I am unsure if it’s a sensor that’s going bad or what. I do have a crack in the top of my fuel tank that I have patched with JB Weld, I don’t know if those tanks are supposed to run under a negative. If so, could that be causing my motor to run hotter to push fuel?
 

ILENGINE

Lawn Royalty
Joined
May 6, 2010
Threads
43
Messages
10,730
Will need to know what model and spec of Kohler engine you have. From your description sounds like EFI. What indication are you getting that the engine is overheating.
 

cdwatt54

Forum Newbie
Joined
Jul 14, 2024
Threads
1
Messages
3
Will need to know what model and spec of Kohler engine you have. From your description sounds like EFI. What indication are you getting that the engine is overheating.
It is a Bosch EFI model I believe. My yellow check engine light come on, then a short while after my cylinder head light come on. Problem is the yellow some time beeps at me and other times it doesn’t.
 

hlw49

Lawn Addict
Joined
Jul 11, 2021
Threads
42
Messages
1,598
Have you pulled the blower housing off and cleaned the cylinder fins? Model type and code no off the engine would help.
 

cdwatt54

Forum Newbie
Joined
Jul 14, 2024
Threads
1
Messages
3
I personally have not cleaned the fins, that’s on the list of this to do. I have had it in the shop a couple of times for oil leaks.
 

ILENGINE

Lawn Royalty
Joined
May 6, 2010
Threads
43
Messages
10,730
If the cooling fins around the head and cylinders on air cooled engines are blocked will cause overheating and in some cases engine damage..
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
65
Messages
24,995
And doubley so on a walker or hopper with a catcher over the engine
MY customers come in rvery 6 months for services and it takes hours just to clean all of the fine clippings out of the engine & mower
 
Top