The Daily Yardman Thread

[BlazNT]

Re: MTD Yardman Transaxle Rebuild

Morning Ted, Stayers and Newbies.

 

[Ronno6]

Re: MTD Yardman Transaxle Rebuild

Ya know for your blasting purposes, 100 - 125 psi should be more than adequate,I would worry more about cfm per min.

I operate my blast cabinet @60psi, and the more air I build up in the tank, the longer the blaster can operate before the compressor kicks on.

But, I have found that, as the tank pressure nears 150psi, the motor begins to labor and the starter kicks in/out struggling to keep things going.

Looks like 125# will have to do.

Though it still needs some refinements, it is really great to have a blast cabinet!

 

[Ronno6]

Re: MTD Yardman Transaxle Rebuild

This 'un's fer you, Chuck.............

 

[Ronno6]

Re: Compressor operating pressure

Same thing....... different nozzles, whichever you prefer, maybe SCUM-BAG woulda been a better choice !! .. :laughing:..:laughing:

Looks like the forum got itself a new BAG EXPERT !

 

[Boobala]

Re: MTD Yardman Transaxle Rebuild

This 'un's fer you, Chuck.............

View attachment 39864

Ya wanna check my keester, meester ..?? .. :laughing:..:laughing:

 

[Boobala]

Re: Compressor operating pressure

Looks like the forum got itself a new BAG EXPERT !

It's in the BAG !! .. :laughing:..:laughing:

 

[Boobala]

Re: MTD Yardman Transaxle Rebuild

Well Ronno, looks like Marty got screwed over by the basturdly Bush ... AGAIN !! .. :thumbdown:..:thumbdown:

 

[Ronno6]

Re: MTD Yardman Transaxle Rebuild

Well Ronno, looks like Marty got screwed over by the basturdly Bush ... AGAIN !! .. :thumbdown:..:thumbdown:

Yeah...well, the #18 got his,too!

That's Bristol..........

 

[Boobala]

Re: MTD Yardman Transaxle Rebuild

Gooooooooooooooooooooooooooooooooooooood Mornin Chuck ..

Good Mornin guys, N U 2 dingle-berry ..

Thought 4 2day ..

 

[Roger B]

Re: MTD Yardman Transaxle Rebuild

I operate my blast cabinet @60psi, and the more air I build up in the tank, the longer the blaster can operate before the compressor kicks on.

But, I have found that, as the tank pressure nears 150psi, the motor begins to labor and the starter kicks in/out struggling to keep things going.

Looks like 125# will have to do.

Though it still needs some refinements, it is really great to have a blast cabinet!

Ron,

If you ever posted pictures (Of the blast cabinet set-up) I missed them. Did you get the dust deputy knock-off? How does that work? Don't you find 60 psi a little low for quick cleaning? Mine works best from max pressure (150 psi) down to around 100 psi.

What sort of media are you using?

Rog