Striping! Gotta love it!!

that looks good for it being waste high. do you have a bagging system.


Was waist high 4 weeks ago.

If you look close you can see where I put clippings. On the first cut.

That is one good thing about bank owned homes. Don't have to remove the clippings just make it look ok.

We run two mowers on tall grass.
First one runs high lift blades. The. Second one cuts it again with gator blades.

Can make it look good on the first cut if the grass is dry.
 
never got into the bank owned home. do you have a lot maintenance issues cutting that over grown grass all the time

Tall grass hurts the whole mower.

Spindle bearings is what gives me problems. But I can replace all 6 for $20
Only had to replace them once this year.

Waist tall is $600 half acre. Takes around 2 hours.

I run my deck belts a half inch shorter.
I only use briggs engines because they don't bog down as much as others and they handle the abuse.

I love cutting overgrown yards and hills.
Its a Challenge.
 
lol, I'd love them for $1,200 an acre. when we ran Dixie choppers we ran shorter belts.
I prefer fuel injection, you should try that they don't bog down either and they do decent on fuel.
 
Was waist high 4 weeks ago.

If you look close you can see where I put clippings. On the first cut.

That is one good thing about bank owned homes. Don't have to remove the clippings just make it look ok.

We run two mowers on tall grass.
First one runs high lift blades. The. Second one cuts it again with gator blades.

Can make it look good on the first cut if the grass is dry.

That's amazing to me that you can take down waist high grass in 2 passes..
 
Back
Top