Export thread

Hello all.
I have a FS 80 Trimmer that need a new trimmer head. I had seen some old Echo heads that you inserted the ends of the string into the holes and then you turned the bottom? of the head and it drew the string in. When it was all drawn in you had a piece from 1 hole to the other that you cut that left you with 2 pieces out ready to go.
I have no clue which Echo unit it was and/or if it would even fit onto the end of the Stihl.
Does Stihl make a head like that?
Little help here, please.

Thanks.
Bobby

ps. maybe this should have been in the Echo arena.

I'm pretty sure I seen a stihl YouTube video not to long ago of a that style head I'm sure they have it at your stihl dealer. I have that style on my echo trimmer it's pretty nice. If I can find the video ill post a link for you.

After re reading your post I may not have been talking about the same thing.

Is this what you speak of
https://www.youtube.com/watch?v=lfaVPZgtOb0&feature=youtube_gdata

That is it. Thanks. I'll have to hit the dealer next.
Talk about quick help.Gonna have to share y'all on face book again.:thumbsup:

No worries glad I could help. The one I have on my echo you just feed the line through and turn the head no cutting required its the cats behind.

Would the one from Echo fit the Stihl? Reading the reviews on the Stihl unit, they don't look real promising.
Found a new dealer here in town. Less than 2 miles away. Good Times. :thumbsup:

Thanks
Bobby

I'm not sure might be worth looking into they sell them at Home Depot for $30 they're called speed-feed

Speed feed. Sounds like it might be the way to go. Home Depot is on the way, might as well stop there first.
I can't believe I hadn't seen these before. My Troy-Bilts always gave me a 10 minute break when I changed them. This should be so much quicker. :smile:

Thanks again,
Bobby

Band-aid Kid said:

Speed feed. Sounds like it might be the way to go. Home Depot is on the way, might as well stop there first.
I can't believe I hadn't seen these before. My Troy-Bilts always gave me a 10 minute break when I changed them. This should be so much quicker. :smile:

Thanks again,
Bobby

Click to expand...

You can change the line in the Echo in < 30 seconds.

Speed-Feed Fast Loading Trimmer Head, Speed Feed Trimmers | SpeedFeedHead.com

The ones from HD looked pretty cheap. Went to Dealer and got one for 32 dollars. We'll see how long this one lasts.
Thanks for your time and trouble.:thumbsup:

Bobby

Band-aid Kid said:

The ones from HD looked pretty cheap. Went to Dealer and got one for 32 dollars. We'll see how long this one lasts.
Thanks for your time and trouble.:thumbsup:

Bobby

Click to expand...

Just curious but which one did you buy the Autocut 25-2, or the Auto cut C-25-2?

the Auto cut C-25-2. (32.00)
Met the dealer and asked about the cutter, if it and/or the guard needed to be changed. I was assured there were no alignment problems using this head.
Overall, nice shopping experience.
Great forum support.

Thanks everyone for being here!:smile:
Bobby

Band-aid Kid said:

the Auto cut C-25-2. (32.00)
Met the dealer and asked about the cutter, if it and/or the guard needed to be changed. I was assured there were no alignment problems using this head.
Overall, nice shopping experience.
Great forum support.

Thanks everyone for being here!:smile:
Bobby

Click to expand...

I asked because I use the same head the Auto cut C-25-2 on my Stihl 90 and 110 and they seem to work well only problem is and I didn't realize that the C-25-2 only uses the 095 line and I purchased some 105 gator line not realizing it wouldn't work. I guess the next heads I'm going to buy will be the 25-2 it uses both line sizes from what I was told.

I run 105 in the 25-2 for cutting in ditches

(( cowboy up and get over it ))