sears GT14, need some help

[EngineMan]

Page 10 in the manual I posted.

 

[frantz65]

the main issue with these guides is that it doesn't list what each screw is on my carb.

 

[Rivets]

Go to the Walbro website, type in WGH-17 and it will list the parts breakdown. From that you will be able to figure out the purpose of each screw.

 

[frantz65]

ok, got the screws figured out, guess its time to go heat up the garage,give it all a good cleaning and see what happens.

 

[EngineMan]

the main issue with these guides is that it doesn't list what each screw is on my carb.

I take it you did not read page 19...!

 

[frantz65]

I take it you did not read page 19...!

my carb has a standard bolt at base of carb. nothing with a needle through it.

 

[Fish]

When you get back to it, put in a new plug and adjust the valves...

 

[frantz65]

valves I do need to look into, can hear a tick. just gotta find the clearences and how to get in there. been busy listing vintage bottles on ebay(at least trying to :laughing

 

[Fish]

Tecumseh Engine Intake and Exhaust Valve Clearances

 

[frantz65]

Tecumseh Engine Intake and Exhaust Valve Clearances

thanks for that link! assuming its like any other motor ive done? find TDC and set from there?