runs a second

reynoldston do you know how to get the needle out? also what looks like a fuel shut off screws into bottom of float bowl, w/black ground an a white wire mower is model 1642h 16 hydro 10 to 12 yrs old. have done valves an such, gets gas to float bowl, cranks, won't hit.
 
Last edited:
Engine is a Briggs & Stratton 16 HP model # is 80777 type is 0662B1 It's a older Riding mower all help appreciated....
 
hitch45 said:
1642 sabre carberator fuel adjustment does any one know?thanks:confused2:
Click to expand...

I think that Briggs has a non adjustable float in it. The carburetor is made in Mexico and is not repairable. Like I said earlier I couldn't find parts for the one I repaired and had to replace the carburetor. Maybe with your model number someone will come up with something different then what I just told you?? I have found the time and money you spend on trying to repair some of these foreign carburetors you are better off replacing it.
 
reynoldston said:
I think that Briggs has a non adjustable float in it. The carburetor is made in Mexico and is not repairable. Like I said earlier I couldn't find parts for the one I repaired and had to replace the carburetor. Maybe with your model number someone will come up with something different then what I just told you?? I have found the time and money you spend on trying to repair some of these foreign carburetors you are better off replacing it.
Click to expand...

So it is a Vanguard?
 
will get a magnifying glass out and see tomorrow I can't find any marking on the carb at all,will check again.. thank you
 
What you will need is the engine model number. B&S puts this number on the fan shroud. ( BUT ) You will have your best luck finding parts for this mower right from a John Deere dealer with the tractor model number not the engine number. John Deere has there own part numbers.
 
You must log in or register to reply here.
Back
Top