Residential grade zero turn durability

[djdicetn]

Yea there is a lot to look at, but what's funny is that ZTR mowers are all basically the same. They have the same brand motors, drives, etc. You just have to buy the one that best suits your needs and the one with the bells a whistles you want. I do believe that when you make the purchase regardless of make you need to do it from the most localized dealer with warranty and service in mind.

Warranty & service in mind.....hmmmmm...would that be related to this morning when I went to the dealer where I purchased my Gravely to buy my Christmas present(a sunshade attachment for the ROPS) and mentioned the recent recall on the fuel filter for the Kawasaki engine???? No hassle and a quick free-replacement, even though it's a relatively inexpensive product, but it could have been a more expensive part that was recalled!! I'm sure if you bought a ZTR at a big box retailer with a Kawasaki engine that had the recalled fuel filter you could also go to that same dealer(an authorized Kawasaki dealer) to get a replacement part but I'm certain that would not be as much of a "hassle-free" encounter!!

 

[txzrider]

I must admit....after looking at approx. 8-9 brands of commercial ZTR's, when my head momentarily stopped spinning I purchased what "stuck out in my mind":0)

I like this comment... I bought mine based on the "feature it had that I never knew I needed!! Which was the slide out deck for easy maint.

 

[jimrs]

I looked at all the z turns when I was shopping for a mower. I also read a lot of stuff on the internet. For a homeowner with just an acre to mow, about like mine I found the most bang for the buck in the Toro 4235. It was a last year with the Kaw engine. I got the mulching kit and an hour meter and have been very happy with it.

My neighbor had a Snapper and hated it as the deck would get knocked out of level if he hit anything on the side of the deck, Trees, edge of house anything. He borrowed mine and cut 2 acres with it and went an bought a ExMark the same size. He would not deal with the Toro dealer for some reason. He then later told me he wished he had the Toro for the 2 speed setting as cutting around the lake and trees it gave him more control than the ExMark.

People on this site want everyone to buy what they bought including the ones who are professional mowers. I think that most are of good quality with the exception of a few that I won't name because I don't like them don't mean there bad I just don't like them and won't buy that brand.

Stick to a local dealer and a name brand and you will be happy with whatever you purchase.

 

[Ragnar4841]

I like this comment... I bought mine based on the "feature it had that I never knew I needed!! Which was the slide out deck for easy maint.

Similar yet different thing for me--started out intent on buying a Gravely (as I am a Gravely 816 owner), looked at several other brands and swirled a bit until I narrowed it to a decision between the Gravely HD 48 and Kubota Kommander. Really liked the heavy-duty deck hanger & Kawasaki on the Gravely. Preferred the ergonomics & pricing ($500 less) of the Kubota. Beyond that, the units are similar in almost every way.

What it unexpectedly came down to as I was standing at the Gravely dealer & staring at the HD was the chute on the 48" deck and what would fit in my shed & through my gate. The Kubota has a flip-up plastic one (which I hold up in place with a bungee without getting out of the seat). The Gravely has a nice, heavy-duty rubber one but it's held in place with a pin & would require me to get off the seat to remove & reinstall it using two hands every time (and when placing it in storage position it would ding up the paint on the deck). Pain in the butt!

Never expected such a minor feature that broke the tie! Kubota wins, but I think I would have been just as happy with the Gravely had it fit.

 

[Ric]

People on this site want everyone to buy what they bought including the ones who are professional mowers. I think that most are of good quality with the exception of a few that I won't name because I don't like them don't mean there bad I just don't like them and won't buy that brand.

I don't think people on this site want you to buy what they bought, most of all the Professional mowers as you say. I think a lot of people come to the forum looking for information on a given piece of equipment with there minds already made up to the fact that what they are looking at is what they I want or is the best and if you believe that it is by all means go buy it. I mean really if a person thinks he already has all the answers why waste time asking any questions.

 

[txzrider]

Similar yet different thing for me--started out intent on buying a Gravely (as I am a Gravely 816 owner), looked at several other brands and swirled a bit until I narrowed it to a decision between the Gravely HD 48 and Kubota Kommander. Really liked the heavy-duty deck hanger & Kawasaki on the Gravely. Preferred the ergonomics & pricing ($500 less) of the Kubota. Beyond that, the units are similar in almost every way.

What it unexpectedly came down to as I was standing at the Gravely dealer & staring at the HD was the chute on the 48" deck and what would fit in my shed & through my gate. The Kubota has a flip-up plastic one (which I hold up in place with a bungee without getting out of the seat). The Gravely has a nice, heavy-duty rubber one but it's held in place with a pin & would require me to get off the seat to remove & reinstall it using two hands every time (and when placing it in storage position it would ding up the paint on the deck). Pain in the butt!

Never expected such a minor feature that broke the tie! Kubota wins, but I think I would have been just as happy with the Gravely had it fit.

I certainly understand. I wish I had that on mine... the newer Country Clippers went to the industrial strenght rubber type flip up shield. In my case I had been fighting my deck the week before laying in a field trying to get baleing wire out from under it... so as soon as I saw the dealer slide the deck out by pulling 1 lever... I was sold.

 

[txzrider]

Now I have decided I need another feature!! I need to have the mulching kit cover be easy to attach and remove. I finish mowing at my house and then we load up the mower to take it to mow my Dad's acre... for that we need the mulching cover off.

 

[lawn mower fanatic]

Now I have decided I need another feature!! I need to have the mulching kit cover be easy to attach and remove. I finish mowing at my house and then we load up the mower to take it to mow my Dad's acre... for that we need the mulching cover off.

You could use something like this:

http://www.lawnmowerforum.com/build-yourself/17003-diy-ocdc-discharge-chute.html

 

[ddbtdd]

I would recommend Husqvarnas(or Dixons, made by Husqvarna but a little better quality)

I second that.
I really like the Dixon Ultra52/Husqvarna's more bang for the buck but I'm quite happy with my Snapper Pro s150xt.
The Ultra52 is an entry level commercial grade mower btw.