looking for ignition coil for lawn mower

[tracminhvu]

Hi expert,

My Ignition coil is dead! yes, I tested with a ignition coil tester.
I search web for briggs and stratton "9945d" coil pack but found nothing with exact match!
Anyone know if there is a compatible coil that would work, thank you very much.

 

[mechanic mark]

Post model xxxxxx, type xxxx, trim xx, code xxxxxxxx from engine for correct coil, thanks Mark

Electrical Parts

shop.briggsandstratton.com

https://www.amazon.com/Briggs-Stratton-595291-Magneto-Armature/dp/B01L1HUHPI

If description does not state B&S OEM Part, it is cheap replica.

PartsTree - Home of OEM Parts for Outdoor Power Equipment

We are committed to providing you with the largest selection of OEM parts from the best brands, the best diagrams and part search tools anywhere.

www.partstree.com

 

[tracminhvu]

I found this, hopefully enough: Murray 22", 5.75hp
Thanks.

 

[ILENGINE]

I found this, hopefully enough: Murray 22", 5.75hp
Thanks.

What we need should be either stamped into the blower housing above the spark plug but could be under a decorative cover or stamped into the metal flap over the muffler depending on engine style

 

[tracminhvu]

What we need should be either stamped into the blower housing above the spark plug but could be under a decorative cover or stamped into the metal flap over the muffler depending on engine style

found this: hopefully this it it, thanks.

 

[Rivets]

Those are EPA numbers, which won’t help us. See IL’s post for engine numbers.

 

[StarTech]

802574

 

[slomo]

I tested with a ignition coil tester.

I would pull the kill wire off to confirm the coil good or not.

 

[tracminhvu]

Thank you all for all the help, I didn't know that is hard to find engine model for my mower, here are pics from all sides, and I can't find more information. At the very least, I think I will order 1 with the similar dimensions to make sure it fits, then cross my fingers.
Slomo, good to know, my mower has not been cleaned for 20+ years, lol.

 

[Rivets]

The shroud in picture #5 has the engine numbers on that flap which will be over the muffler. I bet if you clean off that shroud you’ll find the numbers we are asking for. Also, that entire block needs a good cleaning.