John deere rx75 won't move

B

ba_50

Well-Known Member
Joined
Jul 9, 2014
Messages
132
Orx75x476599
The drive belt is good and the linkage to the transmission works ok.
How can I fix it?
Thanks
 
You said checked the drive belt this mower uses two drive belts so you to check both of them.
 
I take that back. Looks like a belt could be missing on a double pulley.
 
This mower is new to me. The deck is off, and the belts are on it. With the motor running, the motor pulley isn't turning. When the f/r lever is moved the motor dies with one or the other pedals pushed in. Do both have to be down?
 
So with the engine running, the pulley that is on the engine crankshaft isn't spinning?
 
Ok, the wheels turn with the seat safety switch pushed down
Wonder why it won't move with wheels on the ground, unless the belt is slipping
 
Took out the jack and mower moves but not much speed and noisy. New lower drive belt?
 
You must log in or register to reply here.
Back
Top