Husqvarna YTH18542 won't start

[hillybilly]

Have you watched the two videos? Is that what yours is doing?

 

[Randomguy]

Have you watched the two videos? Is that what yours is doing?

Have you watched the two videos? Is that what yours is doing?

Before I moved the flywheel by hand all you could hear was the starter solenoid.

 

[hillybilly]

Even if you don't attempt to adjust your valves, it wouldn't hurt to have a working knowledge of the procedure. Also, there are prolly numerous videos on how to adjust them.
I'll bet I adjusted mine at least 8 or 9 times until I couldn't anymore. That when that little dohickey breaks and needs to be replaced.

 

[Randomguy]

Even if you don't attempt to adjust your valves, it wouldn't hurt to have a working knowledge of the procedure. Also, there are prolly numerous videos on how to adjust them.
I'll bet I adjusted mine at least 8 or 9 times until I couldn't anymore. That when that little dohickey breaks and needs to be replaced.

I've seen some videos on it but it looks like it's beyond my skill set.

 

[hillybilly]

All you have to lose is a little time and you might just fool yourself. Like anything else that I've tackled, I usually watch a handful of videos before attempting anything.
Go for it!