Husqvarna Owner Check-In --- Read This First!

[snoh8rbob]

bought a used 2554 from previous owner of house. have had a couple of minor problems, but now have a major one. burnt or sticking intake valve on #1 cyl. need to know where to get tech manuals for B & S 440000 engines.

 

[snoh8rbob]

Back again, spoke to soon, not a burnt orstuck valve.... bent push rod on exhaust valve..

 

[mikes3028]

New to the site - Minnesota, Twin Cities area. 3 acres, mostly wooded and my LGT26V54 is a trooper!
I use a Swisher lawn Vac trailer and a 42" Snowblower for year-round use.

Just tuned the motor and replaced the starter. Will be replacing the seat and re-painting the bottom this spring. Previous owner was a bit rough on the body...View attachment 12231

Hey jaymallin, I just bought the YTH24K48 and am planning on pulling a Agri Fab yard vac also. Do you have the hydrostat trans and if so how is it holding up pulling your yard vac? just curious, couldn't make my mind up on buying one with manual trans or the hydrostat. So far the YTH24K48 will cut some serious grass. And fast too! Very pleased with it so far, but only have about 5 hrs on it. I didn't read anywhere in the manual to change the oil after the first few hrs for break in. does anyone have this info? All I can say is what a mower!

mikes3028

 

[Amadhunter]

Hey ya'll,

Hunter here from Louisiana, I have a EZ 4824 F. Not a terrible mower for the price. Have been a Husky fan for a lng time due to their saws ane trimmers. Saved up and bought the mower last summer. I have since noticed some pretty bad quality and design flaws that makes me wish I'd saved a little more for a better mower. For example, the leveling wheels on the deck are single shear! They bent very quickly after only a few uses. This isn't the stamped deck, but the fabricated one. Why on earth would Husky hamstring an otherwise beefy deck with single shears? Now it's impossible to get an even cut. Any ideas?

 

[aislabyjim]

Hi, I have taken delivery of a R316T AWD which I believe is similar and has the same transmission as the 322 but is fitted with a two cylinder 603cc Kawasaki engine. The deck is the 103 Combi. My garden, near Whitby Yorkshire, is just over an acre but almost half is slopes with angles up to 15 degrees. The choice of mower was largely influenced by the positive posts and videos on this forum. Have had two cuts to date and and am delighted with the machines performance. My previous mower was a rear discharge Cub Cadet which having had three hydrodrive failures had to be scrapped due to spare assemblies being no longer available. I have a twentyfive year old Roper which has only needed blades and one belt during it's life but can be a knuckle ride on the slopes in damp conditions. Looking forward to reading further posts from the forum.:biggrin:

 

[Devious6]

Just signed up - will update and add some photos tonight. I've got a 54" GT...can't remember the model off the top of my head and will be adding an MZT61 to the stable tomorrow or Friday (my local dealer is picking it up today and servicing it for delivery). More later....just wanted to say Hi!!

Mark

 

[phcaan]

GREETINGS to all Husqvarna (aka "Husky") mower owners! :thumbsup:

If you're new to the forum, please reply to this thread and introduce yourself and your mower (that is, if your mower have a name :laughing. maybe attach a photo or two of your mower and show off your pride and joy.

Also, if you haven't done so already you can upload a user avatar (picture under your user name). You can do so by clicking on settings and "edit avatar" or just click here.

Please be helpful and friendly to all other Husqvarna owners (how could you not, right?) and if you like this forum, tell your friends about it. :biggrin:

We want to make this the best resource for Husqvarna mower owners, and to do that we need your help! Questions? Experiences? Stories? Data? Photos? Articles? Links? Cool Husqvarna stuff? Post it here!

Last but not least, please let me know if you have any suggestions for the site. We'd love to hear them.

Well I would like to check in. I own a 2011 Husqvarna GTH27V52LS and so far have been quite pleased with it. Also is there a way to reply without including the previous quote?

 

[lawn mower fanatic]

Well I would like to check in. I own a 2011 Husqvarna GTH27V52LS and so far have been quite pleased with it. Also is there a way to reply without including the previous quote?

Nice mower! You can use the +Reply to Thread button.

 

[phcaan]

Nice mower! You can use the +Reply to Quote button.

View attachment 17301

Thanks, I will try to get a picture up soon. All I see is the +reply to thread green button which does not seem to do anything and the "reply with quote" buttons. What am I doing wrong?

 

[lawn mower fanatic]

Thanks, I will try to get a picture up soon. All I see is the +reply to thread green button which does not seem to do anything and the "reply with quote" buttons. What am I doing wrong?

Whoops! Yes that's what I meant. The +Reply to Thread button (the button that is circled in the picture in my last post). If that doesn't work you can reply with a quote and then just delete the quote.