Grasshopper 616 won't go up inclines.

Dust is the enemy of hydros , so not unless you are doing this is a very clean garage & the underside of the mower is spotless
You are not really changing the volume all you are doing is getting the oil on the bottom & the air on the top
 
Ok good. Like I said, since this will be time consuming I'm going to do this over the coming weekend. How often should I move the levers back and forth slowly?
 
From reply # 2
Engine running as low as possible , wheels off the ground bypasses open the do slow forward & reverse movements with the lap bars .
Might take several hours to get all the air our .
Click to expand...
From reply # 7
Wheels off the ground and as you work the lap bars from full forward to full reverse the wheels will become more responsive as the air is expelled till eventually you can not stop them by dragging your foot on the wheels
Click to expand...
Some will come good in a couple of minutes
Others may take all day then some
 
bertsmobile1 said:
From reply # 2

From reply # 7

Some will come good in a couple of minutes
Others may take all day then some
Click to expand...
Good morning, I didn't get a chance to work on my mower this past weekend but I do have another question for you. Do you have anything that explains how to adjust the levers? I know it's in the linkage but I can't seem to get them right.
 
You must log in or register to reply here.
Back
Top