Govoner linkage question- m:31d777
- Thread starter Kartrcr02
- Start date
pugaltitude
Lawn Addict
Its easier if you watch you tube.
Its difficult explaining how.
How Throttle and Choke Linkage is Setup on a Briggs 2 piece Carburetor (NEW ENGINE) - YouTube
Not the same engine but should be the same way as your carb is set up.
SeniorCitizen
Lawn Addict
I can't help you with this one but I can suggest a way to prevent the problem in the future.
Before disconnecting anything , springs , linkages etc., using a paint touch up brush or similar , color code each connection . EXAMPLE : If you touch a spring end where it connects in a linkage hole you're done with that end . If the spring has dis-similar ends, use a different color on the second end. It makes assembly easy the next day or 3 years later.
Before disconnecting anything , springs , linkages etc., using a paint touch up brush or similar , color code each connection . EXAMPLE : If you touch a spring end where it connects in a linkage hole you're done with that end . If the spring has dis-similar ends, use a different color on the second end. It makes assembly easy the next day or 3 years later.