Export thread

My Cub Cadet has 160 hours without a blade change. Is it possible to change blades without removing the deck?

bandbarb said:

...Is it possible to change blades without removing the deck?

Click to expand...

You would need a mower lift.

Mower Lifts | 300lb Lawn Mower Lifts| MoJack EZ | MoJack-The MoJack

RhinoGear EZ Lift Rider Ramps 500-Lb. Capacity, Model# 11935 | Lawn Mower Lifts| Northern Tool + Equipment

lawn mower fanatic said:

You would need a mower lift.

View attachment 16032 Mower Lifts | 300lb Lawn Mower Lifts| MoJack EZ | MoJack-The MoJack

View attachment 16033 RhinoGear EZ Lift Rider Ramps — 500-Lb. Capacity, Model# 11935 | Lawn Mower Lifts| Northern Tool + Equipment

Click to expand...

OK, Thanx.

bandbarb said:

OK, Thanx.

Click to expand...

Make sure the lift you buy can support the weight of the mower.

Go buy a $30 floor jack.

Or just put the front wheels on a block of wood.

Or take the 2 mins and take the deck off. Really only takes 2 mins

(( racing is the only sport that you need two balls ))

bandbarb said:

OK, Thanx.

Click to expand...

The Mojack EZ will be more than enough for your mower, I use it on my 48" ztr and the Grandstand. It would be the safest way if you don't want to remove the deck. You can get one at Tractor Supply right now for $149

http://www.tractorsupply.com/en/store/mojackreg;-ez-lawn-mower-lift?cm_vc=-10005