746-0879 For MTD Tiller

[PTmowerMech]

PTO cable for a MTD tiller, 212-390-000.

 

[StarTech]

It anyone has it, it is going to be NOS part. None in my inventory.

 

[PTmowerMech]

It anyone has it, it is going to be NOS part. None in my inventory.

I've noticed that. I can't find it anywhere. You'd think this would be a readily available aftermarket part. But I can't even find one on Ebay or Amazon. If I can't find it here, maybe I can rig something.
Was trying to adjust it out for the new belts, when the threaded part broke. I'm pretty sure I can't weld it back and make it hold.

 

[StarTech]

Know how you feel. I just had kill off a Stihl 009 that I repaired the carburetor, brought a clutch drum for; to have the oil pump to clog up and none of the parts are available.

 

[bertsmobile1]

I've noticed that. I can't find it anywhere. You'd think this would be a readily available aftermarket part. But I can't even find one on Ebay or Amazon. If I can't find it here, maybe I can rig something.
Was trying to adjust it out for the new belts, when the threaded part broke. I'm pretty sure I can't weld it back and make it hold.

Welding cables that are under load rarely works for very long.
If you are going to make a go of this you really need to find a control cable maker.
I have not fitted a genuine cable to anything ever.
If I can't make it with the gear I have here then it is off to Conwire to get them to make me a copy .
Usually it is about 20% to 30% of the wholesale price of an after market cable and about 5% to 10% of the retail price.
Now I know USA parts prices are a lot cheaper than OZ ones but slipping the cable into a satchel and sending it off for copying takes far less time that scouring the web hoping the part you end up with will fit.

 

[mechanic mark]

https://shop.haldemansupply.com/Products/4941463/746-0879-m

Give these folks a call in the AM.

 

[Rivets]

Have you tried a Cub Cadet cable. Check this site. https://www.google.com/url?sa=t&rct...9/PD/4093727&usg=AOvVaw2cGhY68e_rR1iMHZ4X-qV0