2006 ZForce 50 Hydro Issue

[TRMPyro]

I have a 2006 ZForce50 that I am having trouble with one of the hydro transmissions on. The right side is sticking and not driving as well as the left side. It is usable, but very frustrating. I am looking for any advise on servicing or repairing the hydro, part number I have from the online manuals is Cub Cadet 01008193. Any help would be appreciated. I saw a thread about changing the gear oil, is there a procedure available for doing that? Thanks

 

[BlazNT]

There are numbers on the hydro its self. Im not finding what I need to tell you what to do.

 

[TRMPyro]

I couldn't see any numbers on the Hydro, but I haven't pulled it yet either, might be on the top side. Model number for the Mower is 53AA5B7p710 with a SN 10D136Z02035 03/2006. Left handle moves forward and reverse with ease, and recenters when released. Right side requires force in both directions and has to be centered, will not recenter. Thanks for a quick reply.

 

[BlazNT]

Right side requires force in both directions and has to be centered, will not recenter. Thanks for a quick reply.

With engine off do you have same problem?

 

[TRMPyro]

Yes, no difference that I recall, running or not. When I went out to look for the numbers I moved the handles without it running, very difficult on right side.

 

[Ric]

I have a 2006 ZForce50 that I am having trouble with one of the hydro transmissions on. The right side is sticking and not driving as well as the left side. It is usable, but very frustrating. I am looking for any advise on servicing or repairing the hydro, part number I have from the online manuals is Cub Cadet 01008193. Any help would be appreciated. I saw a thread about changing the gear oil, is there a procedure available for doing that? Thanks

Which hydro units do you have? EZT or 2800

 

[TRMPyro]

Based on the Parts Tree diagram and the parts manual, they are IZT.

 

[bertsmobile1]

Have a close look at the linkages and pivots, they occasionally need some lube.
The control rod on the hydro has no resistance to movement is it just a valve, like your fuel tap.
All the hardwear between the hydro & the lap bar provide the centering and resistance to movement.

 

[BlazNT]

Yes, no difference that I recall, running or not. When I went out to look for the numbers I moved the handles without it running, very difficult on right side.

My hydro's act different with the engine not running. I would check the linkage for dirt and needing lubed.

 

[BlazNT]

Have a close look at the linkages and pivots, they occasionally need some lube.
The control rod on the hydro has no resistance to movement is it just a valve, like your fuel tap.
All the hardwear between the hydro & the lap bar provide the centering and resistance to movement.

Darn fast typer compaired to me.:laughing: