Smokeeater
Active Member
- Joined
- Jun 12, 2018
- Threads
- 17
- Messages
- 59
I have a 14.5hp briggs (31R607-0011-G1) and it wants to start to turn over but it isn't completely. Well it did run a couple times but stalls or not at all now. The flywheel starts to turn but stops
-I thought starter but had it off and tested it and it's working fine.
-I isolated everything from battery (new) to starter and they're all working good
- I noticed when I try to turn the flywheel by hand it's a little hard at one point...so I took off the valve cover and made sure the valves were in adjustment right. I adjusted them to 0.004 intake and 0.006 exhaust, put it back together and nothing has changed.
Any thoughts?
Thanks!
-I thought starter but had it off and tested it and it's working fine.
-I isolated everything from battery (new) to starter and they're all working good
- I noticed when I try to turn the flywheel by hand it's a little hard at one point...so I took off the valve cover and made sure the valves were in adjustment right. I adjusted them to 0.004 intake and 0.006 exhaust, put it back together and nothing has changed.
Any thoughts?
Thanks!