011 chain oiler diaphragm.

J

Jon Bretzinger

Forum Newbie
Hi! My name is Jon Bretzinger. I'm new to the forum. I acquired a really well preserved 011 saw. It's one of bright orange vintage and came in a really nice case. After getting it home, I found out it doesn't oil. Found the problem, it's got a bad diaphragm. The problem I have is I can't find one anywhere. Would anybody out there know where I could find a chain oiler diaphragm for the 011. Thanks!
 
If you mean
1120 640 3100 oil pump plunger with diaphragm.
Then there are quite a few listed in various places.
Stihl mark it as NLA but I found quite a few listed down here in OZ, in the UK & in the USA
Green Acres
Chinese copy from HK

Currently there are knock off 010 , 011 & 012 saws all over the place so there must be a supplier of the diaphragm or the knock offs must have a different system that may be able to fit your saw.
Otherwise breakers like Randy's
 
Thanks! All I could find was a complete pump in GB. 40 some pounds to buy, 60 some pounds to ship to US. I gave 75 US for the saw. Lol! That was all I could find.
 
Well the Chinese copy that I went to the effort of making a hot link to has them for under $ 10 and there was 9 in stock so by now there should only be 8 and one should be on it's way to you.
The Australian link has them for $ 35 ( AUS), about $ 20 US + shipping which will be another 10.
However Australian e-shops have a bad habit of advertising stuff that they don't have because it used to be listed in their wholesale suppliers catalogue .
But they do say it is in stock.
 
bertsmobile1 said:
Well the Chinese copy that I went to the effort of making a hot link to has them for under $ 10 and there was 9 in stock so by now there should only be 8 and one should be on it's way to you.
The Australian link has them for $ 35 ( AUS), about $ 20 US + shipping which will be another 10.
However Australian e-shops have a bad habit of advertising stuff that they don't have because it used to be listed in their wholesale suppliers catalogue .
But they do say it is in stock.
Click to expand...
Scrubcadet10 said:

Stihl 011 Chainsaw (011AVTEQ) Parts Diagram

Select a page from the Stihl 011 Chainsaw (011AVTEQ) exploaded view parts diagram to find and buy spares for this machine.
www.diyspareparts.com www.diyspareparts.com

even though this site is foreign, it can supply you with a part number

welcome to the forum,Jon!
Click to expand...
Thanks!
 
bertsmobile1 said:
Well the Chinese copy that I went to the effort of making a hot link to has them for under $ 10 and there was 9 in stock so by now there should only be 8 and one should be on it's way to you.
The Australian link has them for $ 35 ( AUS), about $ 20 US + shipping which will be another 10.
However Australian e-shops have a bad habit of advertising stuff that they don't have because it used to be listed in their wholesale suppliers catalogue .
But they do say it is in stock.
Click to expand...
Thanks Bertsmobile
 
Jon Bretzinger said:
Thanks Bertsmobile
Click to expand...
I really appreciate the effort, but unfortunately that is a different part number. That shows part number 1106-640-3100. Similar, but shaped differently. I need part number 1120- 640-3100. It it round shaped, with a flat on one side. With the diaphragm and pushrod in the center. That might be the system the Chinese updated to?
 
You must log in or register to reply here.
Back
Top