Search results

Swapped out the PTO clutch with a used one had laying around. It was the problem and got it fixed. Then the PTO bolt fell out on me. Embarrassing but I didn’t tighten to bolt good enough and feel out while running.

That’s a huge help. Can’t thank you enough

Looking to see what size bolt I need to replace the PTO clutch on a Briggs and Stratton motor. The bolt I took out had really bad threads. Engine is a 4045A7 type 0211. Any help would be greatly appreciated

I came in possession of a hustler fastrak z 42. The original Honda engine blew so the owner replaced with a Briggs and Stratton. He gave up when it came to wiring it all up. Fast forward and I got all the wires hooked up. Everything starts up fine but now when I engage the PTO switch, the blades...

Attached our the photos of the alternator I bought. It’s a 20am alternator as I was thinking the magnets would be for the smaller fly wheel. The two grey wires come straight from the rectifier. Would those two grey wires hook straight to the two yellow wires from the alternator? I don’t see a...

Put the new switch and bam, the baby cranks up and runs. Now we are on the finding a solution to the next problem… when I engage the PTO, it barely turns. So trying to figure out if it’s the PTO switch, bad wiring or the clutch is bad. also, the Honda motor had two grey wires coming out of the...

Wanted to provide you a little update. We have re wired the whole system and matched wires. This lead us to find the problem of when the keys is turned all the way to start, it blows the fuse. Now to find the solution. attached is a picture that shows two wires connected together. They were...

First of all, thanks for all the help! I felt that I may have sounded like I was being argumentative and wanted to make sure that was not the case. I fully understand that this person has completely messed up the wiring with this mower. I feel like there is a solution but is going to take a lot...

New update. Got everything hooked up and engine will run if we by pass the switch. If we turn the switch, to crank it, fuse blows

The black wire come from under the engine is not hooked to ground, it’s hooked to the carburetor solenoid

Thanks for the help. This is how it came wired

Pictures below. I have been studying wire diagrams as well.

I recently came in possession of a hustler fastrak mower, model number 927368. The mower had a binder engine on it but owner replaced it with a Briggs and Stratton. He got the new motor on but gave up during the wiring process. The engine will run off I jump it. However, I need some help with...