D Demons15 Member Joined Jun 4, 2023 Messages 13 Jun 17, 2023 #1 Looking to see what size bolt I need to replace the PTO clutch on a Briggs and Stratton motor. The bolt I took out had really bad threads. Engine is a 4045A7 type 0211. Any help would be greatly appreciated
Looking to see what size bolt I need to replace the PTO clutch on a Briggs and Stratton motor. The bolt I took out had really bad threads. Engine is a 4045A7 type 0211. Any help would be greatly appreciated
StarTech Lawn Royalty Community Leader Joined Feb 19, 2020 Messages 14,455 Location Pluto Jun 17, 2023 #2 0.438-20 UNF Translation 7/16-20 Will need to be at least a grade 5 or better. You have to figure to length yourself as no info was provided.
0.438-20 UNF Translation 7/16-20 Will need to be at least a grade 5 or better. You have to figure to length yourself as no info was provided.
D Demons15 Member Joined Jun 4, 2023 Messages 13 Jun 17, 2023 #3 StarTech said: 0.438-20 UNF Translation 7/16-20 Will need to be at least a grade 5 or better. You have to figure to length yourself as no info was provided. Click to expand... That’s a huge help. Can’t thank you enough
StarTech said: 0.438-20 UNF Translation 7/16-20 Will need to be at least a grade 5 or better. You have to figure to length yourself as no info was provided. Click to expand... That’s a huge help. Can’t thank you enough
