Search results

I cleaned my Snapper (281223BVE) carburetor and it idles ok but when l engage the blade the engine revives up and down.it seems it is starving for More fuel.Can the fuel filter or diameter of the fuel line matter.also could it be air lock and how to prevent it.21A907 0124 E1

I cleaned my Snapper (281223BVE) carburetor and it idles ok but when l engage the blade the engine revives up and down.it seems it is starving for More fuel.Can the fuel filter or diameter of the fuel line matter.also could it be air lock and how to prevent it.12 hp 21A907 0124 E1

Can anyone help me out on what size of socket do l need for Screw (Flywheel) 698139 Thank you

I have this issue again with the mower trying to shut off while releasing clutch/ brake pedal,l have taken the kill wire off and it works perfect,but l plug it back it tries to shut off.l double checked all three safety switches but no luck .could it be a ground wire or maybe ignition switch...

Hello , trying to set the gaps clearance on my Snapper rear engine 21A907-0124-E1.Its a 12 hp B&S .set them with engine cold or hot?

Hello , trying to set the gaps clearance on my Snapper rear engine 21A907-0124-E1.Its a 12 hp B&S .set them with engine cold or hot?

I have a question for your expert advice,my mower after turning it off after awhile doesn't want to start but crank,.after leaving it alone it will start.is it carb or coil going bad

I have a question for your expert advice,my mower after turning it off after awhile doesn't want to start but crank,.after leaving it alone it will start.is it carb or coil going bad

Recently exchanged new pos and neg cables and starter got it going and did my yard.now my mower starts but when l release the brake / clutch paddle it turns off.

my victory was short lived,got my snapper going after replacing neg and positive cables.Now when l press the brake / clutch paddle and let go to mow and my engine shuts down.if l press the paddle back it stays on.

Cut my front yard and parked the mower to trim edge my yard and it won't crank over.l first heard the solenoid click and then silence nothing.Tried pull starting and nothing.l am charging my battery just in case and the solenoid is new .it has a starter and pull start attachment...

I have a Snapper 281223BVE that has two belts listed.was wandering which belt it would be and they are7043844YP and 7022252YP.Any suggestions on which it would be. 28 inch mower deck.

Turns out that my motor on MTD mini riding mower has a damaged shaft and has been good till now ,going to purchase new engine,My snapper had a safety switch that was acting up on mower blade keeping engine from starting,got it working and I'm just waiting for engine to come in.Thank you all for...

If l want to replace my oil rings ,how do l go about ordering them.Would they be standard oil rings. I'm doing them because l have to open the engine and replace oil slinger.

Did a little trouble shooting as much as I could,no crank or spark.checked voltage at starter and it has 12.89 and at solenoid connection the same Voltage, any suggestions on this please.Snapper mower 281223BVE also checked ignition switch

I disconnected the magneto ground wire and my mower started,l have a snapper riding mower and was trying to figure out what the problem is.once l connect wire back and it won't start.