Search results

Im parting this Murray riding mower. Engine is gone, transaxle is trash, drive pulley is trash. Let me know what you need. Murray 40702x92B

121602 0269-E1 010816 FA John Deere JS60H walk behind Briggs rebuild kit #792383 but ordered the rotary 12293. Carb has 2 welch plugs on the carb inside the bowl that I removed to clean carb. The bigger welch plug fits one hole but the other is way too small for the other hole. Briggs IPL...

Murray 12.5hp and 40in cut. Transmission is bad and engine needs head gasket. Plus needs key switch. Payment by paypal only and ship US only.

Anybody need any parts off this Sears Craftsman II 12.5hp and 38in cut 917.255520. Mower is in pieces now. Getting to start throwing parts up on ebay soon. I ship in US only and paypal only.

Sears GT3000 50in deck 917.275031 Kohler CV675 23hp vtwin Engine speed only runs on on wide open. I move the throttle down and engine speed doesnt slow down. Everything from what I could see moves freely.

Here pic of the dash.

What causes the gas jell up like jelly in a carb on Briggs and Stratton engine. Last summer I replaced carb sat all winter. Went to start it this year(early spring) started up ran fine so instead hitting stop switch I turned the fuel shutoff valve to off and let it cut itself off. Went out month...

I need help reinstalling the 46 in deck on my LT166. I bought whole mower and mower deck was already off. I tried looking at the JD IPL from JD site but couldnt tell how it goes on.

Can you really test fuel to diagnosis a carb or fuel issue? I had landscape owner call and said he's been having issues with the newer 2 cycle carbs. One he mentioned was the newer TS510 Stihl. He said have this trouble out of the older model. He said he's been replacing carbs on the 2 cycles he...

Does center hole size on plastic weedeater blades matter? Trying locate plastic blades for 1/4in pin on a plastic blade cutting head. The blades that are on there now are yellow and have saw teeth on them. There made by weed warrior. Is half inch holes too big for the replacement?

I got a TB525es 4 cycle and not exactly understanding what the manual says about checking oil level. It says "Look into oil fill hole. The oil should touching the most inner most thread".

123K02 0541-E1 05080957 Cleaned and rebuilt carb. Still stay running unless I keep hitting the primer bulb to keep it running. Bad primer bulb?

42828x8b with Tecumseh 17.5 Enduro engine. OEM engine engine Lhead twin Briggs. PO put in his own headllight switch on a on/toggle switch on the side cause he didnt know how to turn the lights with the key switch. First time fuse holder melted a 20A fuse and found broken terminal on the...

What are options for a replacement engine for my Ariens rear tine tiller? It supposed to have a 5hp Tecumseh horz. shaft H50-65397L but someone put a Briggs 5hp on it. Here's the specs of the Tecumseh 5hp Extended cam for reverse Crankshaft 2 13/32 in length, OD is 3/4, 3/16 straight key way...

I have SV-4B1E engine thats on a little wonder mantis tiller. Wondering anyone can cross reference this echo/little wonder part number to a zama rebuilt kit. 12530012820

I have no parking brake and 10 second delay before coming to a complete stop when in gear. I checked the brakes I least have half if not more left on the pads. How do you adjust them? 38618x92a

The engine, hood, and grille are gone. Seat is shot. Gas still good condition but needs another gas cap. Let know what you need. West Virginia

New points, condenser, and spark plugs. Turns over but wont start. Fuel pump isnt pumping fuel when pulling the hose off the fuel pump going to the carb. Wont even start on carb cleaner or pouring gas into the throat of the carb. Points set at .020. Any other ideas before I replace the fuel...

Model - H5050 7013 Serial - 08664886 This other number was the tag. A-28222. Briggs 130292 0159-03 73022807

Can someone put a model number to this self propelled electric start? Heres one thats not electric start 20606x92a.

I'm in need for a grille for this Murray rider thats not all broke and has working hinges. 42828x8b

Can someone put a model to this? 42 inch and 6 speed. The engine isnt original. I tried 42571x8a but gear shifter is on the left side. Mine is on right side.

Blade only rubs deck when pushing it to mow. Checked blade and its not bent. Same with crank. Blade doesnt rub when sitting still when engine is running. Any ideas or thoughts?

Will a 48in deck from a L120 fit on a L110?

I need help finding a owners/parts manual for this mower. Briggs 20HP Twin 460777 1876-a1 9701205B This all i could make out for model. 14aj844 Its a yellow yardman with hi and lo forward gears.

Whats preset carb adjustment on this saw that has the compression relief valve?

MTD/Sears 247.888500 Tecumseh HMSK85-155901A Broken connecting rod. Connecting rod marked the surface on the crankshaft when rod goes. Crankshaft 35980A No longer Available. Short Block 756325 No longer available. Can I clean up the markings on the crankshaft with emory cloth and put new...

I'm looking for the hydro lever with all the hardware, hydro lever plastic cover and a Kohler 17hp command engine and the 38in bare deck.

What other Bosch spark plug can use beside the HS8E. Bosch discontinued it as of 8/2011. It replaces the champion DJ8J that was used in the little Homelite XL-2 Chainsaws.

I'm looking for the hydro lever with all the hardware, Kohler 17hp command engine and the deck.

I could use some help on putting model to this snowblower. I also need a parts and owners manual for it also.

Does anybody know the part numbers for auger and drive belts? I looked on partstree and jackssmallengine but there not showing any belts. I have the owners manual and its showing belts and cables. Toro 724-38072-7900001 & up

I'm looking or a new or used booster fan. Part number is 212370. 16hp Lhead twin that goes on a Snapper LT16 series 2. 402437 0686-01 84121912

Need a starter pulley for Poulan 3700. Also need a 20 in bar also. 530010674 subs to 530026371 - NLA

I need help finding a 18in bar and chain for Homelite C 52. I looked in the oregon and sten catalog but didnt fine anything under C52. Oregon just has the C series listed as .404 pitch. Just a replacement bar is offered.

I need Snapper LT16 parts. I need decals, brake pedal assy with a other misc parts that go on it, headlight switch, seat, rear diff cover that goes in between the 2 rear wheels, PTO mounting hardware and wiring harness w/headlight wiring complete or parts harness. Also need the nuts and bolts...

I'm repainting a Snapper LT16 series 2 riding mower. Wondering which color red should I use?

Cub Cadet 1525 hydro, Kawasaki FH381V/FH430V Dad bought it at Lowes 10years ago. He always used the 10w-30 valvoline. I noticed oil consumption last year. So this year I put 30w in it instead and still having oil consumption. No signs of leaking oil. New spark plug this mowing season.

Does anybody know the compression spec is on 18hp Lhead twin Briggs, 422437,1209-01, 1988 model? Tested left cylinder at 30-40 but peaked 60 once. Tested right cylinder at 60-70 but peaked 90 once. I guess its time for rebuild.

Acquired a Snapper LT16 series 2 rolling chassis over the weekend with no engine. Needs a 16/18 Lhead twin hoz shaft. Gonna restore it and keep for myself. I have a old Sears GT mower that has 18 hp Lhead twin briggs on it thats still in good shape to resell. Should I keep looking for the...

Whats the resell value of rear engine rider where you live at? In my area I see the standard riding mowers with the engine in the front go for $300-$600 depending on brand name. But I havent seen whole alot of rear engine riders for sale.

I need a another wiring harness for my murray riding mower but I think its been discontinued. I was wondering if there murray similiar to it that I could use the harness from that will work on my mower? Murray 40702x92B Briggs 289707 0121-01 9705284D

917.272201 DLT I was wondering anybody has this Sears part #140189 so I can see what it looks like. Its a drive pulley but diagram is showing a metal sleeve with it unless its the crankshaft there showing. This mower has a PTO clutch. It came loose on the PO and bent the bolt. Some of metal...

I have a Homelite HT21. I wanna the ID and OD size for replacing the fuel line. I have 1/8 id x 1/4 od and 1/16 id x 1/8 od but there either too small or too big.

Can someone put model to this Poulan chainsaw?

Poulan/weedeater/featherlite cuts off when squeezing the trigger. Will stay running on idle longs I dont squeeze the trigger. I say its the clutch but others say its carb related. What do you guys think?

I need help finding parts listing/manual for a FR2.3 18in gas chainsaw.

I have ground problem on a 1988 mtd hechinger riding mower. I ran wire from neg post battery to the mounting bolt on ground plate on a 3 pole solonoid. Somehow the wire I ran touched the the little red wire when running the mower. I help running that wire again in a way where it wont touch other...

16.5 Lhead twin Briggs and G series/42in deck. 7 speed shift on the go. Someone changed the seat so no model number. How does the drag link go this riding mower? I'm talking about the rod that mounts on top the right wheel spindle and goes the steering gear. I think someone put it on where the...

Poulan Weedeater Featherlite, curved shaft. What the trick to take apart the string head spool to reload the string?