Search results

Results 1 to 12 of 12
  1. M

    reinstall deck

    With the help of a buddy and following instructions in manual the deck is back on. Mower is running and cutting grass again. Thank y'all for your help. Tom
  2. M

    reinstall deck

    I have 30" murray RE model# 13ac26jd058 manufactured 2015. I had to change the drive belt, what a pain, not the deck drive belt. Anyways, got it all back together except for the deck If I put it on front pin can't line up back two and if I get back two on can't line up front pin. It came off...
  3. M

    30" Murray RE wont move

    All the pulleys seem fine, spin freely and no wobble in them. The belt was 6 1/2 years old. Thank y'all for the tips. Spent 3 1/2 hours screwing with it today and still don't have new belt on. Will give it another go tomorrow. Got it from a long time friend who died and his widow gave it to me...
  4. M

    30" Murray RE wont move

    After digging into mower a little deeper it turns out the ground drive belt, 95404331, had shredded and was being held on by 3 or 4 cords. Had to take a bunch of crap off to even see it. Should it be changed from underneath or up top? Thanks for the help, Tom
  5. M

    30" Murray RE wont move

    Model 13AC26JD058 made in 2015 B&S 10.5 engine. Went to mow the yard today, started right up but blades wouldn't engage with height set 5. Lowered it to 4, same result. When I lowered it to 3, blades engaged. With mower running and blades engaged I raised deck to 4 and it was all good. Just...
  6. M

    Murray Riding Mower won’t start

    Batteries don't last much more than 2 year unless you hook it up to a battery tender. 12v 155cca 185 ca or you can spend a lot more and it won't last much longer..
  7. M

    Murray Riding Mower won’t start

    Make sure the starter solenoid leads are tight. Solenoid is probably behind battery.
  8. M

    Brake/clutch pedal

    It's got a disc brake with pads on either side.
  9. M

    Brake/clutch pedal

    I looked at page 12 and all it shows is brake rod. I need to see the rotor and yolk assembly. Also how far back should pedal be when brake is released. My pedal hardly moves at all. Thanks, Tom
  10. M

    Brake/clutch pedal

    Having problems with disc brake again. Anybody have a picture of the entire assembly? MTD doesn't have any pics or drawings of what it is supposed to look like. If I back off the adjustment nut enough to get mower to roll in neutral it wont stop when running and in gear.
  11. M

    Brake/clutch pedal

    Manuals really helped. Adjusted disc brake. Replaced spark plug and blade too. Running and mowing like it was new. Thanks for the help.
  12. M

    Brake/clutch pedal

    Have a 2015 30"Murray rear engine mower that wheels are locked up when in neutral and brake is off. Will move when engine running and in gear. Model# 13AC26JD058 Serial# 1A235820177. Could use some ideas as to what is wrong. Friend died and his wife gave it to me with no manual. Thanks in...
Back
Top