Search results

I would ask, it one was to simply extended the air intake hose 1' straight up and then re attached the stock filter. This would get it above much of the stuff that it is currently being picked up. Anything it might come in contact with would certainly hit the driver first. Would one think this...

Hi Bert, for the record, the filter is actually 1.1" taller than the OEM, on my machine there is plenty room. I for one have always choose a longer filter if possible. As for the air filter, I blow it off with a leaf blower after every use and change at least twice a season. I agree with you...

OEM Kawasaki 49065-7007 recent changed to 49065-0721 Wix replacements 57035 2.3" tall 32 micron (same as OEM) 51056 2.7" tall 21 micron Is anyone using 57148? 3.4"tall 5 micron. I see no problem fiting this one on my machine Cheers, Ray

Buddy, thank you, that is a solid solution if necessary. I have submitted a request to Bobcat, I'll wait and see what become of it before I shell out $50 for 16" of hose with a couple fittings...Cheers, Ray

Hi Buddy, per what I have read the oil drain in M20-2.50 thread, the only 20MM EZ drain I have located is 20MM-1.5 thread.

Has anyone replaced this with a EZ-Drain oil valve? I want to make sure there is clearance for it to screw into the engine before purchasing. thanks Ray

All, the oil drain has a reducer, standard drain hole is M20-2.50, Does anyone know the size & thread it is being reduced down to fit the tube adapter?

Can someone tell me the size/thread of the yellow plug that is in the oil drain line on my FR651V please. Valve is of poor quality and I will to replace,. thanks Ray

Sir, what did you decided on? Cheers, Ray

Mine is on a 2019 48" CRZ.

Country Clipper with stand up deck

Sir, your storage tip is good advice, once the leaves are gone I will leave my machine tires off the floor. Cheers, Ray

I missed my chance, I'd go look at a Country Clipper with Joy stick control and pop up deck..

I'm giving EZ Slide a try, have the done the entire bottom.

Anyone tried this? https://www.farmshow.com/view_articles.php?a_id=1583

I use the leaf blower every mow, a nice coat of car wax also does wonders (ya might be a redneck if you wax your mower). As I indicated below, there is no way to avoid wet grass. I recently put a coat of EZ Slide on the bottom. It is much improved but I'm still looking for a better solution...

CRZ 48", I looking for ways to keep it from sticking to the bottom, I in GA an it is simply not possible to only mow when it is dry. My only complaint with this machine is it will not process wet grass well. My old Cub Cadet will cut it in a rain storm, never clog and even do a good job. It's...

What products do you use and how do you keep your deck clean from build-up? thanks Ray

Gentlemen, share the tips & products you use to preventing grass from sticking to your deck, Cheers, Ray

JMHO, I would look at something otherthan a B&S engine... r

Gentlemen, I'm considering removing the mulch kit from my machine. I would appreciate input from anyone with a similar machine that has done the same. I'm curious what effect it will have on cut quality and also buildup under the deck. thanks Ray

Try turning it over in the dark, if you've a stripped place you may see spark

Gentlemen, what is you thoughts on blade thickness. I've a CRZ 48", the stock blade are .250 thick. I see many replacement blades that are ~.200. Some say heavier are harder on the PTO and belts. What about cut quality? Run time between changes? Please share your thought based on real...

Little extra oil never hurt anything, r

Thank you, I did identify a Rotary blade that sparks my interest, I'll put them on the shelf to try in the spring.

Thank you, as I read, does anyone have an thoughts on XHT MARBANE STEEL Blades ? I video impresses me>

Gentlemen, does anyone know of a 16 1/4, mulch blade that is .250 thick? Most I find are ~.204 thick.

Ok. I can see I stepped in it, my machine is a Bobcat CRZ 48", I'm just South of Atlanta, I believe I have nearly every variety of common grass that grows in these parts on a 1.5 acre lot. Typically the dew keep it wet much of the morning and early evening so it's often wet when I cut, I...

Gentlemen, what kind of results do you have with Gator style blades on ZTR's? thanks r