bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
some long time ago ( Dec 2018 ) I replaced the stator on a 31Q777 0119 - G1 briggs that was fried, literally on a Country Clipper .
Naturally Briggs could not supply a 592830 stator , nil stock n Australia and none due till March 2019.
So I pinched a 592829 of a 21000 and fitted the appropriate rectifier to go with it.
Well the mower ran OK so I decided to leave it till the next service ( big mistake )
SO the Clipper is in the yard now & I have just fitted the new stator & refitted the full wave rectifier.
The new stator I was supplied was 592830 which I was told was what the old one had superceeded to .
Problem is I get nothing out of it and of course being 18 months after purchase I can not send it back.
This is a full wave stator so I should get 30V AC from it but I occasionally get 3V and nothing from the regulator.
Ohmed the stator and get around 0.9 Ω between the pins and nothing between either pin & ground so it should generate by my reckoning
Any ideas before I ring my friendly briggs dealer & get stung for another $ 145
Naturally Briggs could not supply a 592830 stator , nil stock n Australia and none due till March 2019.
So I pinched a 592829 of a 21000 and fitted the appropriate rectifier to go with it.
Well the mower ran OK so I decided to leave it till the next service ( big mistake )
SO the Clipper is in the yard now & I have just fitted the new stator & refitted the full wave rectifier.
The new stator I was supplied was 592830 which I was told was what the old one had superceeded to .
Problem is I get nothing out of it and of course being 18 months after purchase I can not send it back.
This is a full wave stator so I should get 30V AC from it but I occasionally get 3V and nothing from the regulator.
Ohmed the stator and get around 0.9 Ω between the pins and nothing between either pin & ground so it should generate by my reckoning
Any ideas before I ring my friendly briggs dealer & get stung for another $ 145
Last edited: