I have an old JS36 John Deere push mower that has great difficulty starting (never starts after many pulls etc. etc.). Have replaced the spark plug, took apart the carb and thoroughly cleaned it, scrubbed the flywheel and magneto pole faces and re-gapped them etc. etc. Does anyone here have experience with this JS36 mower? If so, I'll describe the problem thoroughly plus all I've done so far.
New profile posts
Results 11 to 20 of 490
-
H
HellonaTroy Auto Doc's HellonaTroy wrote on Auto Doc's's profile.
I've watched countless videos and I still don't understand this. The CVT worked fine until I fixed it. Seriously, it drove in all speeds. Now it's just creeper gear. I replaced the belts because they were frayed and cracked. I paid $55 for an Oem lower belt and about 40 for an Oem upper. Now it only runs in creeper gear.
I replaced the cylinder head, piston, rings, and bearings on my old Stihl MS250 chainsaw. Everything seems to work fine, but when I put the side case on, bar, chain, and tighten then down, the chain is locked down. I have had this saw for 20 years and I really have liked it. Does anyone have a suggestion as to what might be the issue?
-
B
Billerica50 ak2stepin Billerica50 wrote on ak2stepin's profile.
Can you share how you figured out the removal of you gas tank? I have the same problem and I can’t find any fasteners.
I have a toro 22" self propelled recycler with smart stow model 21442. I order a traction cable on toro with the part number they gave me but it's way to short. the original cable measured 82' overall and the conduit was 69". this cable is routed down the RH if your standing behind the mower. I haven't been able to find the correct cable and, Toro is no help at all. any ideas what's the correct cable.
I have a Gravely ZT42XL that starts but dies when the brake is released or the PTO is engaged. I've checked the safety switches but cannot find the problems. Any suggestions. The seat switch and relays have been replaced and the PTO does not engage, just spins until the wires are pulled out?