New profile posts

Troy Bilt 42" Bronco brakes frozen and unable to move mower. Pulled brake pads and cleaned chamber and roll pins. Followed steps to adjust brakes and adjustments seemed to work until driving. Brakes fail, readjusted and still have stopping problems. Any ideas on fixing stopping problems?

Briggs 31C707, 17.5HP. Amazon carb hunts constantly; applying choke reduces surging. Original Briggs carb runs briefly, then bogs, surges and blows black smoke. Closing fuel valve temporarily improves it. OEM carb also floods overnight. Fresh gas, good fuel flow, governor linkage free, solenoid gets 12.75V and clicks. No fuel pump. Suspect OEM float needle/seat and aftermarket lean mixture. What should I test next?

Been away for a minute.

I acquired 2 hustler 1500 shortcut mowers. 1 54inch 26hp kolher. 1 48inch 22hp kohler. I can't get the 26 hp mower to charge the battery. 13.4 ac volts out of the stator. new battery. fuses are good. clean connections. swapped rectifier and ign. switch with the other mower (know to be working) and tested all 3 relays (all working)

Txs for your support.
Have issues connecting the governor linkage on a Nikki V Twin carburetors on a Husqvarna YTH24V48. Tried uploading a photo but was not able.

I bought a used toro22” recycler with no grass catcher or frame. I ordered an aftermarket one on Amazon. It came in and I put it together. Alls well. When I cut grass it throws grass between the discharge flap and bag at the top. Does anybody have any idea why it’s doing that. And what I can do to eliminate this.

Can you send me a copy of the schematic for the rm480ex please

Newly acquired Grasshopper 616 with bad engine

I have an old JS36 John Deere push mower that has great difficulty starting (never starts after many pulls etc. etc.). Have replaced the spark plug, took apart the carb and thoroughly cleaned it, scrubbed the flywheel and magneto pole faces and re-gapped them etc. etc. Does anyone here have experience with this JS36 mower? If so, I'll describe the problem thoroughly plus all I've done so far.

I've watched countless videos and I still don't understand this. The CVT worked fine until I fixed it. Seriously, it drove in all speeds. Now it's just creeper gear. I replaced the belts because they were frayed and cracked. I paid $55 for an Oem lower belt and about 40 for an Oem upper. Now it only runs in creeper gear.