New profile posts

Results 51 to 60 of 490
S
Try running another ground wire from negetive side of battery to engine block, sometime they will loose a ground and this is a good way to find out.
P
I need a replacement B & S 690656 intake valve retainer for 28M707. This is not available in Australia or not able to be posted from the US. Any suggestions? Alternatively, does the split retainer for the exhaust valve fit the inlet valve?
Thanks PaulD
N
A separate question has to do with the PARKING BRAKE. The beeper stays on while I'm mowing. I figure it's a cable adjustment. I'm on pp 14-5 in the Manual. Maybe it's the PARKING BRAKE SWITCH. After all, this puppy was bought new back in '91 and I have my fair share of aches and pains at my age. How should I approach this issue?
N
neilljones
Issue resolved
N
neilljones
Determined the answer to this problem from the Honda Shop Manual. The problem was NOT the PARKING BRAKE. The beeper sound may be caused by low engine oil, according to the Honda Shop Manual. We'll see.
N
Hello Robert!
I have a Honda HT-R3009 and the Honda Shop Manual. I'm on pp 11-3, CUTTER DECK. The exploded view shows the TENSION ROLLER above the TENSIONER ARM. My vbelt is wedged under the TENSION ROLLER and I can't quite figure out how to raise or get the ROLLER off the mounting post. How do I raise the ROLLER so I can remove the vbelt?
N
neilljones
Well, I finally figured this out. I bought an pulley/bearing remover/extractor from Amazon. Used the 6" legs to pull the pulley up. Removed the vbelt.
N
neilljones
On a separate note, determined why the new vbelt wouldn't work. Turns out, I have the HT-R3009K1 model, not the HT-R3009. The exploded view in the Honda Shop Manual shows everything I had on mine. Turns out the HT-R3009K1 model has a LONGER vbelt, 71". The new vbelt is on order, but hasn't arrived yet.
S
Still have about 40+ machines to sell
S
ss63
Did this for friends & fun come on time to move on ! willing to trade too can't believe there still here ??
P
HI All , Im new to this site as i have a problem with my husqvarna lt151 transmission , i think its a gonna :cry:, what i need to no is there any other transmisions that will fit it apart from the one thats on it which is a peerless H 206-565 ?🤔 I cant seem to find a used replacement in the uk . Hopefull !!
L
I saw your post on your 290 and I have a 029 that I upgraded with a 039 motor. I found a place, they have an Ebay site but will also sell away from Ebay. Look up See-Saws-Run on Ebay. Fast Shipping and really good prices. You can email or call them and inquire about parts. Email: rhatcher1658@gmail.com or phone number 660-988-0166 and good luck.

Andy

Footer Links 1

Top