New profile posts

Results 171 to 180 of 490
Voltz Hurtz
New here.
Murray Select not tramming right. Sometimes it refuses to go forward or reverse. Sometimes slows to a crawl. Drive belt appears snug with no wear. CVT belt is in great shape. Should I try (if possible) to adjust more pressure to the drive belt?

any help appreciated!
cpurvis
cpurvis
You should consider asking your questions in the Murray forum. It will get seen by a lot more members there than it will here.
F
Homelite Zip Start leaf blower, can’t find model number but was leaking fuel and seemed not to run with less than a full tank. Replaced fuel lines and tank. Has spark, but seems to not get fuel. Pour a little fuel in carburetor starts right up. Primer bulb is slow to pop back. What’s up? Needle valve? Primer bulb?
logert gogert
logert gogert
please make a thread regarding your question
logert gogert
logert gogert
probably your needle and seat is seized.
C
Read the other note first. I use to work at a Massey Ferguson dealer, and have worked on everything with an engine and then some. Does this thing have a tank with some sort of line in it with a strainer, like some chain saws have? Thanks!
G
geelee
I assume its a radius. new model and haven't had to go into tank yet. breakdown show a pickup in center of tank held in with 4 screws. has to be a hose on it being top mounted. either you have an empty tank or the hose fell off
C
Chick
the tank is totally full. Yes, it is a Radius S, I think. Bought it new last fall. I have to walk out and look how to get to the top of the tank. If it is too much work, I think it is still under warranty.
C
Exmark ran out of gas. I checked the fuel filter and it is not plugged, but no fuel would flow from the tank. I pulled the filter completely, and no fuel will flow out of line. I blew back to the tank and I can hear air, but it doesn't sound like any bubbling back through the fuel. This is a 2019 Exmark, with Exmark engine. Thanks.

Footer Links 1

Top