Latest activity

The thread size for the filter on the FR651V is the same 3/4-16 size, so it should work the same. Depending on where the sandwich plate...

I had thought about something similar before. But instead of that setup, using a sandwich plate with the same 3/4-16 thread and adding a...

craftsman t1500 247273740 came to me with a broken wheel drive belt i found the belts but there is no diagram under the tractor. i can...

Thanks I know how to set Governor I'm asking about replacing Governor Need to Crack open and install new one! Meaning new Governor Gear

STATIC GOVERNOR ADJUSTMENT 1. With governor lever nut loose, push governor lever counter-clockwise as far as it will go (wide open...

Darn this site, it erased my reply again. Check the gaskets and make sure one is not upside down and blocking the carburetor vent, it...

Learned From An Old Guy 50 Years Ago- I use lanolin smeared on the areas where grass tends to clump. It works very well on the plastic...

Surplus Center might have a steel tank that will fit. They usually have all manner of tanks for small engines...

Actually the small wire ring is suppose to slip over the fuel line install the fuel filter and then slip the wire ring down over the...

The little cable assembly is for grabbing the hose end once it is forced through the tank grommet, that way the filter can be put on the...

I have to put a new Governor in my BRIGGS 422707-121401 opposed twin! Is the procedure the same as on a OHV Briggs??? Thanks Sorry...

I have to put a new Governor in my BRIGGS 422707-121401 opposed twin! Is the procedure the same as on a OHV Briggs??? Thanks

I have to put a new Governor in my BRIGGS 422707-121401 opposed twin! Is the procedure the same as on a OHV Briggs??? Thanks

It is a 38" riding mower. I pulled the head again and lapped the valves today and they were ok as I suspected. I also looked at the...

Stretched spring more, not leaking now, got new needle if it leaks again. Non adjustability is TRASH.