ZTrak 425 Advice Needed

[Deleted member 97405]

Yes, with the keyswitch on, there should be power at the yellow wire at the keyswitch. The keyswitch simply connects the red wire and yellow wire (#400a) in the 'run' and 'start' positions. See the blue circled area on the diagram below. If you have power at the red wire, but not at yellow wire at the keyswitch, I would replace the switch.

 

[dconder]

Yes, with the keyswitch on, there should be power at the yellow wire at the keyswitch. The keyswitch simply connects the red wire and yellow wire (#400a) in the 'run' and 'start' positions. See the blue circled area on the diagram below. If you have power at the red wire, but not at yellow wire at the keyswitch, I would replace the switch.

View attachment 45773

New ignition switch fixed it. I am back in business. Just need some tweaking of the carburetor now. Thank you so much for your help Will. The wiring diagram helped a ton.

 

[Deleted member 97405]

New ignition switch fixed it. I am back in business. Just need some tweaking of the carburetor now. Thank you so much for your help Will. The wiring diagram helped a ton.

You're quite welcome. That is what we're here for! Glad to be of help.