YTH 180, bad transmission?

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
91
Messages
11,471
Although the YTH 180 IPL don't show it there is supposed to be a belt retainer on the transaxle per Hydro Gear IPL lookup.

These are HG 51229 bracket and 50653 (10-32x1/2 self tapping screw).

Normally in order to the drive belt the fan must be taken off and the driven pulley slide up so the belt can be put on. IF you are to get the belt on without doing this either bracket is missing or severely belt out position.
 

rickeo2

Forum Newbie
Joined
Mar 20, 2016
Threads
3
Messages
8
I put on a new Oem belt, that seems to work now, at least when I operate the mower. Fingers crossed for when the brothers operate it.
 

TobyU

Well-Known Member
Joined
Jun 1, 2014
Threads
0
Messages
556
I put on a new Oem belt, that seems to work now, at least when I operate the mower. Fingers crossed for when the brothers operate it.
If you put an aftermarket belt on the first time and that was probably your problem.
I refuse to install any belt on any machine that's not an oem belt because it had too many problems like this.
They either don't fit properly and don't engage or disengage properly so they really don't work at all or when they do work they just don't work for very long.
 
Top